|
|
|
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
02-24-2003, 01:18 AM
|
#1 |
|
Advanced Senior Member
Join Date: Jan 2003
Location: Deep Piney Woods of East Texas
Posts: 5,116
|
Romanian Training Rifle Malfunction
outdoorsman260
V.I.P. Member Posts: 101 (2/1/03 12:23:16 am) Reply | Edit | Del All Problem with bolt on Romanian Training Rifle -------------------------------------------------------------------------------- Was shooting yesterday, and the trigger became very hard to pull. For 1-2 shots, the trigger was harder to pull, but the gun went off. Then it was a little harder to pull. I stopped, and went into the basement. I then unloaded it and pulled back on the trigger. It clicked, and I assumed that it had went off, until I worked the bolt, and it was too easy to move. I pulled the bolt out and found the problem. The small thing that sticks down into the slot in the bottom of the chamber to cock the gun could be moved freely back and forth. Anyone know what's wrong, and a fix? blake.prohosting.com/~redneck4 warpig883 *TFF Staff* Posts: 6089 (2/2/03 12:31:37 pm) Reply | Edit | Del ezSupporter Re: Problem with bolt on Romanian Training Rifle -------------------------------------------------------------------------------- Sounds like something inside the bolt is broken. Probably have to take it to a gunsmith and have it tore down and fixed. Ignorance is a crime in 49 states. In the other one it is bliss. outdoorsman260 V.I.P. Member Posts: 102 (2/2/03 8:01:21 pm) Reply | Edit | Del Re: Problem with bolt on Romanian Training Rifle -------------------------------------------------------------------------------- Thanks warpig. Didn't know wether it'd be just a spring or something or what. Gander Mountain put a 90 day garentee on it. Guess I'll have to make a road trip. blake.prohosting.com/~redneck4 |
|
|
 |
| Thread Tools | |
|
|
