Iver Johnson 7 shot 22 caliber Parts - The Firearms Forum

StephenCD · 05-17-2012, 11:36 PM

Does anyone have a good idea where parts can be found for an "Iver Johnson, small frame "old model" brake top? I've tried a number of different places but can't find what I need. I kinda sorta broke the "Hammer Spring"(?) located in the grip while cleaning the pistol and need to replace it.

Thank you

hrf · 05-18-2012, 09:01 AM

Any gunsmith who still accepts work on these would probably have a spring that could be fitted, or could make one.

Or if you kept the broken parts, send them to Numrich and they may be able to match it. http://www.gunpartscorp.com/ContactUs.aspx

The mainspring they list for the Model 1900 .22 might even work: http://www.gunpartscorp.com/catalog/...spx?catid=3852 (item 20, page 4)

StephenCD · 05-20-2012, 02:10 PM

Thats the one I had already ordered thinking it might work but it's more than a 1/4 inch too short.

I'll have to ask around and see if we even have a gunsmith in town. None listed in the phone book.

StephenCD · 05-20-2012, 02:12 PM

Will try contacting numrish on Monday and see what they say. Thanks a bunch for the assist

05-17-2012, 11:36 PM	#1
StephenCD Member Join Date: Jan 2012 Location: Missouri Posts: 14	Iver Johnson 7 shot 22 caliber Parts Does anyone have a good idea where parts can be found for an "Iver Johnson, small frame "old model" brake top? I've tried a number of different places but can't find what I need. I kinda sorta broke the "Hammer Spring"(?) located in the grip while cleaning the pistol and need to replace it. Thank you -->

05-18-2012, 09:01 AM	#2
hrf Advanced Senior Member Join Date: Apr 2008 Posts: 2,309	Re: Iver Johnson 7 shot 22 caliber Parts Any gunsmith who still accepts work on these would probably have a spring that could be fitted, or could make one. Or if you kept the broken parts, send them to Numrich and they may be able to match it. http://www.gunpartscorp.com/ContactUs.aspx The mainspring they list for the Model 1900 .22 might even work: http://www.gunpartscorp.com/catalog/...spx?catid=3852 (item 20, page 4)

05-20-2012, 02:10 PM	#3
StephenCD Member Join Date: Jan 2012 Location: Missouri Posts: 14	Re: Iver Johnson 7 shot 22 caliber Parts Thats the one I had already ordered thinking it might work but it's more than a 1/4 inch too short. I'll have to ask around and see if we even have a gunsmith in town. None listed in the phone book.

05-20-2012, 02:12 PM	#4
StephenCD Member Join Date: Jan 2012 Location: Missouri Posts: 14	Re: Iver Johnson 7 shot 22 caliber Parts Will try contacting numrish on Monday and see what they say. Thanks a bunch for the assist