Re: us revolver co 32 # 87025
serial number 87025 (no letter code found on left side grip frame) was manufactured in 1916 (approx 14,250 manufactured that year).
U.S. REVOLVER CO. AUTOMATIC HAMMER-----------------------1910-1935
LARGE FRAME AND SMALL FRAME DOES NOT HAVE HAMMER THE HAMMER ACTION; This is a Brand name revolver manufactured by Iver Johnson’s Arms & Cycle Works to be sold through the wholesale trade. It was never listed in any Iver Johnson’s Arms & Cycle Works catalog, although it was listed in some European catalogs as original Iver Johnson products. Does not have Hammer the Hammer action and relies on a safety notch on the hammer. Hard rubber grip panels with U S at the top, large oversize two piece hard rubber grips were optional. Two frame sizes and three calibers were offered. Standard barrel length: small frame 3 inches, large frame 3 ¼ inches; Calibers: large frame 38 centerfire with 5 rounds cylinder capacity, small frame .32 centerfire with 5 rounds cylinder capacity, .22 rimfire with 7 rounds cylinder capacity Weight: small frame .22 rimfire 12 ounces, small frame .32 centerfire 12 ½ ounces, large frame .38 centerfire 17 ¾ ounces; Height: small frame 3 ¾ inches, large frame 3 7/8 inches; Frame length: small frame 4 3/16 inches, large frame 5 inches; Overall length: small frame with 3 inch barrel 6 3/8 inches, large frame with 3 ¼ inches 7 3/8 inches. Main serial number location on left side of grip frame grips must be removed to see.
VALUE: 100%=$225 60%=$105