|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
V.I.P. Member
Join Date: Feb 2011
Location: Idaho
Posts: 55
|
For anyone know where I can find "cheap" .312 cal bullets? (i have plugged both of my riflesand both are .312) I am looking for some fmj if possible. Also, in bulk preferably. Everything I have found is about 20$ a hundred plus shipping. I don't need anything too special, I just want to shoot my old guns without breaking the bank. Thank you
-->
|
|
|
|
|
|
#2 |
|
*TFF Moderator/Host*
Join Date: Feb 2007
Location: Heart Of Texas
Contributor
Posts: 17,308
|
Hornady.
http://www.hornady.com/store/.312-303-CAL/ I have used them both in .303 brit and 7.62X54R and I found the 174 RN my fav for either.
__________________
It takes 43 muscles to frown, 17 to smile, and 3 for proper trigger squeeze. The latest caliber or gear is no substitute for experience and skill. Rifles and cartridges don't make hits -- shooters do. Fact of life: After Monday and Tuesday, even the calendar says WTF!
|
|
|
|
|
|
#3 |
|
Advanced Senior Member
Join Date: Oct 2007
Location: ND, USA
Posts: 2,443
|
I don't think there is much left for cheap surplus .311/.312 FMJ bullets to be found anymore. I haven't seen any lately but then again I haven't been looking that hard either.
![]() Besides the two Hornady choices that Josh mentioned (or other big brand bullets), keep an eye out for Remington bulk 180gr SPs. You can get them in 100 or 500 count packs...500 being cheaper. Winchester used to have a couple of nice 180gr SP and 150gr PSP bulk bullets too but I think both are discontinued as a bulk component. I really liked using the Winchester 150gr PSP in the 7.65x53 (Belgian/Argentine Mauser), but now I use the Hornady 150gr. Also consider some cast-lead w/gascheck bullets too. There are a few out there for the 7.65 bores. Not really that much cheaper if you're buying them pre-cast & pre-sized but still fun to tinker with. Last edited by Bindernut; 01-10-2012 at 08:39 AM.. |
|
|
|
![]() |
| Thread Tools | |
|
|