Stevens 620A missing screws

mh03911 · 01-12-2012, 10:20 PM

Hello, I am new to the forum. I am trying to salvage an old Stevens 620A that has been untouched in my grandparent’s basement for the past 40 or 50 years. The gun has a lot of surface rust, but otherwise seems to be in ok condition. Before it was put away someone removed all but one of the screws from the receiver in an attempt to disassemble it (I found a broken firing pin when I took it apart). I am having a hard time figuring out what they are. I have the schematics and parts list from Numrich, but I can’t find and exploded view, so it is hard to match a missing screw with a name/part number from the list. I included a left and a right picture with the holes numbered. If anyone can help I would really appreciate it.
1. This is the screw I have. I think it is the breech block retaining screw.
2. Not sure
3. I believe this is the trigger guard screw. This one is hard to find.
4. Not sure
5. Not sure

StoneChimney · 01-13-2012, 03:48 AM

1 - correct
2 - Ejector screw, 520A-292 (out of stock)
3 - Trigger guard screw, 520A-311 (out of stock)
4 - Lifter screw, 520A-468 (available, $2.50)
5 - Cartridge stop screw, 520A-302 (available, $4.00)

I also have 520A-77, Firing Pin, for this model, $17.00.

You can contact us via private message on this forum, or from our website HERE

mh03911 · 01-13-2012, 10:12 PM

StoneChimney,

Thank you very much for the help. I will send you a private message about the parts.

01-12-2012, 10:20 PM	#1
mh03911 Member Join Date: Jan 2012 Posts: 2	Stevens 620A missing screws Hello, I am new to the forum. I am trying to salvage an old Stevens 620A that has been untouched in my grandparent’s basement for the past 40 or 50 years. The gun has a lot of surface rust, but otherwise seems to be in ok condition. Before it was put away someone removed all but one of the screws from the receiver in an attempt to disassemble it (I found a broken firing pin when I took it apart). I am having a hard time figuring out what they are. I have the schematics and parts list from Numrich, but I can’t find and exploded view, so it is hard to match a missing screw with a name/part number from the list. I included a left and a right picture with the holes numbered. If anyone can help I would really appreciate it. 1. This is the screw I have. I think it is the breech block retaining screw. 2. Not sure 3. I believe this is the trigger guard screw. This one is hard to find. 4. Not sure 5. Not sure -->

01-13-2012, 03:48 AM	#2
StoneChimney Advanced Senior Member Join Date: Nov 2010 Posts: 1,087	Re: Stevens 620A missing screws 1 - correct 2 - Ejector screw, 520A-292 (out of stock) 3 - Trigger guard screw, 520A-311 (out of stock) 4 - Lifter screw, 520A-468 (available, $2.50) 5 - Cartridge stop screw, 520A-302 (available, $4.00) I also have 520A-77, Firing Pin, for this model, $17.00. You can contact us via private message on this forum, or from our website HERE __________________ Full service gunsmithing and firearm manufacturing shop. Licensed FFL 07/02 Manufacturer. Visit our website!

01-13-2012, 10:12 PM	#3
mh03911 Member Join Date: Jan 2012 Posts: 2	Re: Stevens 620A missing screws StoneChimney, Thank you very much for the help. I will send you a private message about the parts.