Pump shotgun trigger work

greengeep7 · 01-23-2012, 10:32 PM

I am rebuilding an old pump shotgun trigger group and I ran into a problem.

I assembled the trigger group and i pulled the trigger and the hammer didnt fall. So i disassembled it.

I reassembled the trigger components, checking each piece to see if it was causing the problem. I pull the trigger and the hammer falls and safety works Perfect! But then when I attach the release lever, i pulled the trigger and nothing happens, the hammer didnt fall.

Please help!

Helix_FR · 01-23-2012, 10:50 PM

What make/model?

greengeep7 · 01-23-2012, 11:17 PM

Westernfield 565 which is cross referenced to the Noble 60 series. Exact one from the 60 series, I am unsure, which is part of the problem too. The markings are so eroded away that I cant see much.

greengeep7 · 01-24-2012, 05:28 PM

Nevermind, i think i figures it out. I am missing lever spring, which i noticed after assembling and disassembling the trigger group a few hundred times. So i just ordered the part and hopefully that'll do it.

On a positive note, i can now assemble a Noble 602 trigger housing blindfolded!!!

permafrost · 01-24-2012, 06:22 PM

Quote:

Originally Posted by greengeep7

Nevermind, i think i figures it out. I am missing lever spring, which i noticed after assembling and disassembling the trigger group a few hundred times. So i just ordered the part and hopefully that'll do it.

On a positive note, i can now assemble a Noble 602 trigger housing blindfolded!!!

Just ain't no substitute for experience!

brad87 · 01-26-2012, 04:50 AM

Quote:

Originally Posted by greengeep7

Nevermind, i think i figures it out. I am missing lever spring, which i noticed after assembling and disassembling the trigger group a few hundred times. So i just ordered the part and hopefully that'll do it.

On a positive note, i can now assemble a Noble 602 trigger housing blindfolded!!!

Now you must do it while hanging upside down before you get a nosebleed.

01-23-2012, 10:32 PM	#1
greengeep7 Member Join Date: Nov 2008 Posts: 38	Pump shotgun trigger work I am rebuilding an old pump shotgun trigger group and I ran into a problem. I assembled the trigger group and i pulled the trigger and the hammer didnt fall. So i disassembled it. I reassembled the trigger components, checking each piece to see if it was causing the problem. I pull the trigger and the hammer falls and safety works Perfect! But then when I attach the release lever, i pulled the trigger and nothing happens, the hammer didnt fall. Please help! -->

01-23-2012, 10:50 PM	#2
Helix_FR TFF Moderator/Host Join Date: Apr 2009 Location: Imperial, MO Posts: 3,617	Re: Pump shotgun trigger work What make/model? __________________ Only cowards shoot with their eyes closed.... helixgunsmith.com

01-23-2012, 11:17 PM	#3
greengeep7 Member Join Date: Nov 2008 Posts: 38	Re: Pump shotgun trigger work Westernfield 565 which is cross referenced to the Noble 60 series. Exact one from the 60 series, I am unsure, which is part of the problem too. The markings are so eroded away that I cant see much.

01-24-2012, 05:28 PM	#4
greengeep7 Member Join Date: Nov 2008 Posts: 38	Re: Pump shotgun trigger work Nevermind, i think i figures it out. I am missing lever spring, which i noticed after assembling and disassembling the trigger group a few hundred times. So i just ordered the part and hopefully that'll do it. On a positive note, i can now assemble a Noble 602 trigger housing blindfolded!!!