|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
V.I.P. Member
Join Date: Jan 2010
Location: SE Pa.
Posts: 147
|
What's the story on Smith Enterprises' M14? I got one of these back in late '80s. It's true M14, not reweld or conversion, decent accuracy; flawless function in both modes. I've been trying to see what the current value might be and have surfed any auction site dealing in class 3 I could find. I find very few transferable M14s, some H&Rs and some M1a converted but I find no listing for the Smith Enterprises. I can find numerous of their semis. I did see a site that claimed there were very few of the selectfire versions in private hands. My SN is in the 130's.
-->
|
|
|
|
|
|
#2 |
|
Advanced Senior Member
Join Date: Nov 2010
Posts: 1,087
|
The Smith Enterprises guns show up, but only rarely. Real world estimate $20K-$25K. Here is what the switch should look like:
![]()
__________________
Full service gunsmithing and firearm manufacturing shop. Licensed FFL 07/02 Manufacturer. Visit our website! |
|
|
|
|
|
#3 |
|
V.I.P. Member
Join Date: Jan 2010
Location: SE Pa.
Posts: 147
|
Yep, that's what I have. Even the markings (what I can see, are the same, except the number of course). Are there only just a few out there?
|
|
|
|
|
|
#4 |
|
Advanced Senior Member
Join Date: Nov 2010
Posts: 1,087
|
Yes, very limited production of true M14 receivers prior to 1986.
__________________
Full service gunsmithing and firearm manufacturing shop. Licensed FFL 07/02 Manufacturer. Visit our website! |
|
|
|
|
|
#5 |
|
Advanced Senior Member
Join Date: Dec 2009
Posts: 6,408
|
That receiver heel is quite a bit longer than a GI M14, so I guess Smith made their own receivers. The selector and connector look like GI and probably are.
Jim |
|
|
|
![]() |
| Thread Tools | |
|
|