Smith&Wesson Model 67 - The Firearms Forum

gaowlpoop · 06-26-2012, 06:26 PM

I have a Smith & Wesson Model 67 that I need a value on.

Model 67-1

Carried by a police officer a lot, fired little.

It shows a fair amount of holster wear. The cylinder is polished bright like a mirror where it rubbed the holster. There are also some other places showing similar wear. There is also 2 small dings in the grips, visible in the first photo.

The gun was not cleaned after it was last fired, which was about 20 to 25 years ago. It has lived in a dresser drawer since then, in the holster. The bore is not scuffed or leaded, the cylinder is very very dirty with powder residue. The forcing cone is completely incrusted with powder residue.

It has some sort of a problem with lock up. When dry fired in double action, it does not lock up the cylinder every time. The cylinder is completely free to turn. This does not happen in single action mode. I do not think it is a timing problem, rather a dirt and lack of lubricant problem, but I am not sure.

Thanks

Iron Eagle · 06-26-2012, 06:49 PM

GP, your gun was produced from 1977-1988. NIB value is 500, exc. is 300, VG is 250, fair is 150, poor is 100. It is a stainless version of the model 15, aka the .38 combat masterpiece. It should be easy to give it a good cleaning. You have a good one there. Enjoy.

Lanrezac · 06-26-2012, 07:59 PM

Huh. On a high-quality gun like this, that has not been fired much and has not been cleaned or oiled in 20-odd years, lack of lubrication and accumulated dust from carrying are the first things I would suspect for causing a lock-up problem. My first impulse would be to drench the lockwork with a thin, non-gumming oil (I use Rem-Oil myself) through every available aperture, then let the gun sit, turning it over and upside down once in a while.

(You can take the sideplate off to oil the trigger mechanism more directly, but it's very easy to damage the plate while doing so. Jim K wrote a very good post about this, but I can't find it at the moment.)

But if you think it is a timing problem, the best thing to do is to take it to a gunsmith. Pretty much any gunsmith who works on revolvers should be able to work on it. K-frame Smiths & Weesons are about the most popular revolvers ever made.

BTW, do you plan to sell this gun or shoot it? For shooting, I recommend checking out replacement grips. S&W sold huge quantities of guns with those grips, but most people who shot them much replaced them. Just my $.02.

gaowlpoop · 06-26-2012, 08:42 PM

I intend to shoot it. I have a Model 15 from the mid '70 that has NEVER been fired. I wanted this on to shoot.

06-26-2012, 06:26 PM	#1
gaowlpoop V.I.P. Member Join Date: Apr 2007 Location: Middle Georgia Posts: 162	Smith&Wesson Model 67 I have a Smith & Wesson Model 67 that I need a value on. Model 67-1 Carried by a police officer a lot, fired little. It shows a fair amount of holster wear. The cylinder is polished bright like a mirror where it rubbed the holster. There are also some other places showing similar wear. There is also 2 small dings in the grips, visible in the first photo. The gun was not cleaned after it was last fired, which was about 20 to 25 years ago. It has lived in a dresser drawer since then, in the holster. The bore is not scuffed or leaded, the cylinder is very very dirty with powder residue. The forcing cone is completely incrusted with powder residue. It has some sort of a problem with lock up. When dry fired in double action, it does not lock up the cylinder every time. The cylinder is completely free to turn. This does not happen in single action mode. I do not think it is a timing problem, rather a dirt and lack of lubricant problem, but I am not sure. Thanks __________________ Steven The "news media" has ceased being the watch dog of the people and has become the apologist for an irresponsible government. -->

06-26-2012, 06:49 PM	#2
Iron Eagle Senior Member Join Date: Feb 2012 Location: Louisiana Posts: 653	Re: Smith&Wesson Model 67 GP, your gun was produced from 1977-1988. NIB value is 500, exc. is 300, VG is 250, fair is 150, poor is 100. It is a stainless version of the model 15, aka the .38 combat masterpiece. It should be easy to give it a good cleaning. You have a good one there. Enjoy.

06-26-2012, 07:59 PM	#3
Lanrezac Senior Member Join Date: Sep 2011 Location: Milwaukee, WI Posts: 685	Re: Smith&Wesson Model 67 Huh. On a high-quality gun like this, that has not been fired much and has not been cleaned or oiled in 20-odd years, lack of lubrication and accumulated dust from carrying are the first things I would suspect for causing a lock-up problem. My first impulse would be to drench the lockwork with a thin, non-gumming oil (I use Rem-Oil myself) through every available aperture, then let the gun sit, turning it over and upside down once in a while. (You can take the sideplate off to oil the trigger mechanism more directly, but it's very easy to damage the plate while doing so. Jim K wrote a very good post about this, but I can't find it at the moment.) But if you think it is a timing problem, the best thing to do is to take it to a gunsmith. Pretty much any gunsmith who works on revolvers should be able to work on it. K-frame Smiths & Weesons are about the most popular revolvers ever made. BTW, do you plan to sell this gun or shoot it? For shooting, I recommend checking out replacement grips. S&W sold huge quantities of guns with those grips, but most people who shot them much replaced them. Just my $.02.

06-26-2012, 08:42 PM	#4
gaowlpoop V.I.P. Member Join Date: Apr 2007 Location: Middle Georgia Posts: 162	Re: Smith&Wesson Model 67 I intend to shoot it. I have a Model 15 from the mid '70 that has NEVER been fired. I wanted this on to shoot. __________________ Steven The "news media" has ceased being the watch dog of the people and has become the apologist for an irresponsible government.