nylon barrel

trs455 · 08-25-2012, 07:21 PM

I am wondering if anyone knows where I could get a replacement barrel for a remington nylon 66.

jack404 · 08-25-2012, 07:41 PM

http://www.gun-parts.com/remington22rifle/

hardluk1 · 08-26-2012, 09:14 AM

Why do you think you need a new barrel?? Hard to hurt a 22 barrel unless rusted baddly.
Keep a wayct for your needs at NUMRICH. Listed as sold out right now.

trs455 · 08-26-2012, 08:56 PM

becouse of the two bulges on the outside and the two voids on the inside

trs455 · 08-26-2012, 08:58 PM

they do not carry any barrels

woolleyworm · 08-26-2012, 09:28 PM

Quote:

Originally Posted by trs455

becouse of the two bulges on the outside and the two voids on the inside

Yikes, did that happen when you were behind the trigger or someone else? Obstruction in the barrel or boresighter?

Bindernut · 08-26-2012, 10:05 PM

Numrich Arms doesn't show any barrels in stock for the 66 anymore either.
http://www.gunpartscorp.com/catalog/...spx?catid=4358

I'd suspect the parts supply is getting pretty thin for these rifles since they've been out of production a long time and are popular with collectors/shooters. Not many hitting the scrap heap or bargain rack.
Your best bet would be to find another 66 and part it out.

If you're seriously attached to the rifle, I'm sure you could find a smith that could machine up a barrel blank to fit your rifle. But...that isn't gonna be a cheap project since it would required some milling to fit to the action, chambering, and finishing.

trs455 · 08-27-2012, 08:12 PM

It's not my gun, it was brought to me to fix a feed issue, and when I was cleaning it after disassebly I noticed it.

1917-1911M · 08-28-2012, 10:11 PM

Have you tried Remington customer service.? M1911

trs455 · 08-29-2012, 05:34 PM

yes, they gave me a phone number for a barrel mfg. but I haven't had time to call yet

oldfartrr · 09-22-2012, 02:20 PM

Quote:

Originally Posted by trs455

becouse of the two bulges on the outside and the two voids on the inside

if u cant find a barrel,,, try a new liner,, numrich has those pretty cheap,, have done that for several customers as we couldnt find another barrel for what they had,,,
good luck

oldfartrr · 09-22-2012, 02:22 PM

Quote:

Originally Posted by trs455

they do not carry any barrels

u dont want to wait till they MAY put one on their site,,, keep calling at least once a week, they MAY get one in,,,just if u wait it WILL be GONE before they list it

montveil · 09-23-2012, 08:41 AM

Found this on ebay, much to my surprise.. I would grab it fast as 66 parts are scarse

http://www.ebay.com/sch/i.html?_nkw=...=&_ipg=&_sop=2

oneoldsap · 09-28-2012, 06:31 PM

There are usually one or two at auction on *********.com . I sold one on there earlier this year for $65.00 , timing is everything eh .

08-25-2012, 07:21 PM	#1
trs455 Member Join Date: May 2012 Posts: 8	nylon barrel I am wondering if anyone knows where I could get a replacement barrel for a remington nylon 66. -->

08-25-2012, 07:41 PM	#2
jack404 Former Guest Join Date: Jan 2010 Location: Australia Contributor Posts: 17,622	Re: nylon barrel http://www.gun-parts.com/remington22rifle/

08-26-2012, 09:14 AM	#3
hardluk1 V.I.P. Member Join Date: Nov 2011 Location: nc mountains Posts: 293	Re: nylon barrel Why do you think you need a new barrel?? Hard to hurt a 22 barrel unless rusted baddly. Keep a wayct for your needs at NUMRICH. Listed as sold out right now. Last edited by hardluk1; 08-26-2012 at 09:20 AM..

08-26-2012, 08:56 PM	#4
trs455 Member Join Date: May 2012 Posts: 8	Re: nylon barrel becouse of the two bulges on the outside and the two voids on the inside

08-26-2012, 08:58 PM	#5
trs455 Member Join Date: May 2012 Posts: 8	Re: nylon barrel they do not carry any barrels

08-26-2012, 10:05 PM	#7
Bindernut Advanced Senior Member Join Date: Oct 2007 Location: ND, USA Posts: 2,432	Re: nylon barrel Numrich Arms doesn't show any barrels in stock for the 66 anymore either. http://www.gunpartscorp.com/catalog/...spx?catid=4358 I'd suspect the parts supply is getting pretty thin for these rifles since they've been out of production a long time and are popular with collectors/shooters. Not many hitting the scrap heap or bargain rack. Your best bet would be to find another 66 and part it out. If you're seriously attached to the rifle, I'm sure you could find a smith that could machine up a barrel blank to fit your rifle. But...that isn't gonna be a cheap project since it would required some milling to fit to the action, chambering, and finishing.

08-27-2012, 08:12 PM	#8
trs455 Member Join Date: May 2012 Posts: 8	Re: nylon barrel It's not my gun, it was brought to me to fix a feed issue, and when I was cleaning it after disassebly I noticed it.

08-28-2012, 10:11 PM	#9
1917-1911M Member Join Date: May 2012 Posts: 46	Re: nylon barrel Have you tried Remington customer service.? M1911

08-29-2012, 05:34 PM	#10
trs455 Member Join Date: May 2012 Posts: 8	Re: nylon barrel yes, they gave me a phone number for a barrel mfg. but I haven't had time to call yet

09-23-2012, 08:41 AM	#13
montveil Member Join Date: Oct 2011 Location: mountains of NC Boone area Posts: 24	Re: nylon barrel Found this on ebay, much to my surprise.. I would grab it fast as 66 parts are scarse http://www.ebay.com/sch/i.html?_nkw=...=&_ipg=&_sop=2 __________________ montveil in the NC mountains (Boone area) Salute All persons present in uniform should render the military salute. Members of the armed forces and veterans who are present but not in uniform may render the military salute. All other persons present should face the flag and stand at attention with their right hand over the heart, or if applicable, remove their headdress with their right hand and hold it at the left shoulder, the hand being over the heart.

09-28-2012, 06:31 PM	#14
oneoldsap V.I.P. Member Join Date: Feb 2012 Posts: 102	Re: nylon barrel There are usually one or two at auction on *********.com . I sold one on there earlier this year for $65.00 , timing is everything eh .