|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
V.I.P. Member
Join Date: Jun 2011
Posts: 52
|
I have a solid frame revolver with VICTOR 32 S&W.CTGE on the top strep. SN 83788 on grip toward trigger with H. & R. ARMS CO.
WORCHESTER, MASS. USA on the butt.Nothing on the barrel. Can any body give me an approximate date of manufacture. It will chamber a 32 s&w long. The frame is nickle and the cylinder,pull pin, hammer and trigger assembly are blue.
-->
|
|
|
|
|
|
#2 |
|
Member
Join Date: Nov 2011
Location: tulsa ok
Posts: 44
|
go to the whats it worth forum they can tell by the letter prefix on the seriel number. most of those old guns shoot both the long and the short.
|
|
|
|
|
|
#3 |
|
V.I.P. Member
Join Date: Aug 2012
Location: Buchanan,Tn
Posts: 50
|
1904 -1905 to 1939
Markings of caliber on side of barrel indicate 1905 and later prior was blackpowder- 1904 I think their is a resident h and r guy who can answer it better,as they sometimes didnt follow their own rules and im no h and r expert Last edited by lilmule; 09-29-2012 at 06:41 PM.. |
|
|
|
![]() |
| Thread Tools | |
|
|