When Winchester made rifles in New Haven and Weaver made scopes n El Paso - The Firearms Forum

Bushmaster1313 · 08-28-2012, 11:14 PM

When Winchester made rifles in New Haven and Weaver made scopes in El Paso:

MadScotsMan · 08-29-2012, 07:07 AM

I was born near the Winchester plant. As a kid, I remember driving by there all the time. Very sad to see it go.

MadScotsMan · 08-29-2012, 07:08 AM

Beautiful rifle, by the way!

bobski · 08-29-2012, 09:16 AM

madscoutsman...
i did too.
where are you now?

polishshooter · 08-29-2012, 10:43 PM

My wife's Grandpa in PA used nothing but old fixed K-Weavers with side mounts on his .30-40, his .300 Savage and his .222. 4x on all of them....

Funny that at an estate gun auction last weekend there were over a dozen old K-series Weaver scopes ranging from 2.5X to 10x and a few variables in between....and I was in at "choice" for $50 because there was one with a nice fine dot reticle...and passed when it went to $65...

I wonder if I should have kept bidding...

GunHugger · 08-30-2012, 07:29 AM

I like vintage rifles and vintage scopes to go with them. The old Weavers are still great scopes and if you look they're still around for sale.

A few years ago I was in a gun shop in Pittsburgh. They had a pile, really they were piled up in a display case, of old scopes. I went through them and found a V12 Weaver priced at $40. It was like new inside and out. While I was looking at it and hoping the price wasn't a mistake the guy behind the counter commented "nobody wants those old things, too heavy". OK...I'll take it.

polishshooter · 08-30-2012, 07:46 AM

My Scope Snob buddies who generally will never own anything "less" than a Leupold or a Nikon on the LOW end, both have relatively newer Weavers on at least one of their bench rifles.

They claim the Weaver has some of the best internal adjustments available on any scope, and always have.

Plus their customer service is still almost as good as Leupold. A few years ago one buddy put an older but not very old Weaver he had for years, dind't even remember where he got it, but had never used on his brand new Savage .17hmr and couldn't get it to shoot under an inch, and finally figured out it was the scope.

He called Weaver, they asked if he had his receipt and he said no, they then said send it back and they would see what they could do, and two weeks later a UPS box with brand new Weaver in it was sitting on his steps when he got home from work!

Zane71464 · 08-30-2012, 08:08 AM

I have two of the old Weaver scopes and one of which is an old K6, Wide Angle which I havent had anything to put it on....yet! But as far as just looking through it, it's as clear as a scope could be with nice, sharp crosshairs.
The other is an old 3-9x40AO (40 I believe), V9, but as a kid it was mounted on my Dad's old rifle and I thought I could clean a "spec" off the crosshairs...yeah!
I still have the scope and hope to send it back to Waever to see if the can fix it, to which I havent called them about it. I'd like to have it fixed at whatever cost, just because it was Dad's and it needs to be fixed as it was my fault, as a kid, that messed it up.

Salvage33 · 09-06-2012, 02:32 PM

I mounted a V9 on my 25-06 about 42 years ago. Dual-X reticle, and it is still holding zero.

Only thing I have to complain about is the O-rings on the adjustment caps need to be replaced.

John

Inthewind1976 · 09-07-2012, 11:27 PM

My father swore by the old K4's and Marksman 4's and a couple of em are still in use on a couple of my rifles. For all the stories about "fogging" and "fallen" cross hairs and such, I have never had any sort of (knock on wood) failure with any of em; and they are all at least 50 years old.

08-28-2012, 11:14 PM	#1
Bushmaster1313 V.I.P. Member Join Date: Sep 2009 Posts: 230	When Winchester made rifles in New Haven and Weaver made scopes n El Paso When Winchester made rifles in New Haven and Weaver made scopes in El Paso: -->

08-29-2012, 07:07 AM	#2
MadScotsMan V.I.P. Member Join Date: Jun 2012 Posts: 156	Re: When Winchester made rifles in New Haven and Weaver made scopes n El Paso I was born near the Winchester plant. As a kid, I remember driving by there all the time. Very sad to see it go.

08-29-2012, 07:08 AM	#3
MadScotsMan V.I.P. Member Join Date: Jun 2012 Posts: 156	Re: When Winchester made rifles in New Haven and Weaver made scopes n El Paso Beautiful rifle, by the way!

08-29-2012, 09:16 AM	#4
bobski Former Guest Join Date: Jan 2005 Location: va., conn., & mo. Posts: 948	Re: When Winchester made rifles in New Haven and Weaver made scopes n El Paso madscoutsman... i did too. where are you now?

08-29-2012, 10:43 PM	#5
polishshooter Advanced Senior Member Join Date: Mar 2001 Location: Indiana Contributor Posts: 7,863	Re: When Winchester made rifles in New Haven and Weaver made scopes n El Paso My wife's Grandpa in PA used nothing but old fixed K-Weavers with side mounts on his .30-40, his .300 Savage and his .222. 4x on all of them.... Funny that at an estate gun auction last weekend there were over a dozen old K-series Weaver scopes ranging from 2.5X to 10x and a few variables in between....and I was in at "choice" for $50 because there was one with a nice fine dot reticle...and passed when it went to $65... I wonder if I should have kept bidding... __________________ The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living.

08-30-2012, 07:29 AM	#6
GunHugger Advanced Senior Member Join Date: Jul 2007 Location: SW PA Posts: 1,161	Re: When Winchester made rifles in New Haven and Weaver made scopes n El Paso I like vintage rifles and vintage scopes to go with them. The old Weavers are still great scopes and if you look they're still around for sale. A few years ago I was in a gun shop in Pittsburgh. They had a pile, really they were piled up in a display case, of old scopes. I went through them and found a V12 Weaver priced at $40. It was like new inside and out. While I was looking at it and hoping the price wasn't a mistake the guy behind the counter commented "nobody wants those old things, too heavy". OK...I'll take it. __________________ . “There will be a revolution in this country!” “I don’t believe people should to be able to own guns.” ~Barack Obama "Stand your ground. Don't fire unless fired upon, but if they mean to have a war let it begin here." ~Captain John Parker, to his Minute Men on Lexington Green, April 19, 1775.

08-30-2012, 07:46 AM	#7
polishshooter Advanced Senior Member Join Date: Mar 2001 Location: Indiana Contributor Posts: 7,863	Re: When Winchester made rifles in New Haven and Weaver made scopes n El Paso My Scope Snob buddies who generally will never own anything "less" than a Leupold or a Nikon on the LOW end, both have relatively newer Weavers on at least one of their bench rifles. They claim the Weaver has some of the best internal adjustments available on any scope, and always have. Plus their customer service is still almost as good as Leupold. A few years ago one buddy put an older but not very old Weaver he had for years, dind't even remember where he got it, but had never used on his brand new Savage .17hmr and couldn't get it to shoot under an inch, and finally figured out it was the scope. He called Weaver, they asked if he had his receipt and he said no, they then said send it back and they would see what they could do, and two weeks later a UPS box with brand new Weaver in it was sitting on his steps when he got home from work! __________________ The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living.

08-30-2012, 08:08 AM	#8
Zane71464 Advanced Senior Member Join Date: Aug 2009 Location: Ohio NRA Member Contributor Posts: 5,372	Re: When Winchester made rifles in New Haven and Weaver made scopes n El Paso I have two of the old Weaver scopes and one of which is an old K6, Wide Angle which I havent had anything to put it on....yet! But as far as just looking through it, it's as clear as a scope could be with nice, sharp crosshairs. The other is an old 3-9x40AO (40 I believe), V9, but as a kid it was mounted on my Dad's old rifle and I thought I could clean a "spec" off the crosshairs...yeah! I still have the scope and hope to send it back to Waever to see if the can fix it, to which I havent called them about it. I'd like to have it fixed at whatever cost, just because it was Dad's and it needs to be fixed as it was my fault, as a kid, that messed it up. __________________ Two Words; "Simple Man", song by Charlie Daniels sums up my thoughts on a "few things"! Last edited by Zane71464; 08-30-2012 at 08:19 AM..

09-06-2012, 02:32 PM	#9
Salvage33 V.I.P. Member Join Date: May 2004 Location: Shreveport, LA why leave the USA to visit a 3rd world country? Posts: 475	Re: When Winchester made rifles in New Haven and Weaver made scopes n El Paso I mounted a V9 on my 25-06 about 42 years ago. Dual-X reticle, and it is still holding zero. Only thing I have to complain about is the O-rings on the adjustment caps need to be replaced. John __________________ Living in a nudist colony takes all the fun out of Halloween.

09-07-2012, 11:27 PM	#10
Inthewind1976 Senior Member Join Date: Sep 2008 Location: Central Pennsylvania Posts: 533	Re: When Winchester made rifles in New Haven and Weaver made scopes n El Paso My father swore by the old K4's and Marksman 4's and a couple of em are still in use on a couple of my rifles. For all the stories about "fogging" and "fallen" cross hairs and such, I have never had any sort of (knock on wood) failure with any of em; and they are all at least 50 years old.