|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
Senior Member
Join Date: Feb 2012
Location: Texas
Contributor
Posts: 677
|
Windows in my hunting blind are plexiglass
They can make a glare I'm sure the animals can see How can you decrease the glare and not impede visibility?
-->
|
|
|
|
|
|
#2 |
|
V.I.P. Member
Join Date: Sep 2012
Location: Maine
Posts: 329
|
Remove them?I have windows in 6 different blinds I have built never been a issue for me.
|
|
|
|
|
|
#3 |
|
Member
Join Date: Oct 2011
Location: mountains of NC Boone area
Posts: 24
|
Re- install them at an upward angle so the reflection is upward.
Poaaibly a light work over with 0000 steel wool place dark window screen over the outside I'm out of ideas
__________________
montveil in the NC mountains (Boone area) Salute All persons present in uniform should render the military salute. Members of the armed forces and veterans who are present but not in uniform may render the military salute. All other persons present should face the flag and stand at attention with their right hand over the heart, or if applicable, remove their headdress with their right hand and hold it at the left shoulder, the hand being over the heart. |
|
|
|
|
|
#4 |
|
Advanced Senior Member
Join Date: Aug 2009
Location: i live in southern indiana,old country boy at heart
Posts: 1,506
|
0000 steel wool should take care of it and could be polished out if needed.the only other thing i could reccomend is to use a slightly clouded plastic inside blind. old semperfi
|
|
|
|
|
|
#5 |
|
Senior Member
Join Date: Feb 2012
Location: Texas
Contributor
Posts: 677
|
I have some scrap of the same material I have in the blind
It's common stuff they sell at Lowes I think if I spray it with soapy water from a spray bottle and lightly go over it with the 0000 steel wool or maybe a mild scotch brite pad it will work without ruining the visibility the glare just bugs me because if I look at my blind from 100 yards away, it is concealed great and blends in wonderfully. Then if you move a little depending on where the sun is, you can catch a flash of glare off of those windows Last edited by dbcooper; 09-23-2012 at 01:08 PM.. |
|
|
|
|
|
#6 |
|
*TFF Moderator/Host*
Join Date: Feb 2007
Location: Heart Of Texas
Contributor
Posts: 17,319
|
Just get that camo netting and hang over them. Get the shoot thru screen netting and you wont even have to move it aside to take the shot. Even with a bow
__________________
It takes 43 muscles to frown, 17 to smile, and 3 for proper trigger squeeze. The latest caliber or gear is no substitute for experience and skill. Rifles and cartridges don't make hits -- shooters do. Fact of life: After Monday and Tuesday, even the calendar says WTF!
|
|
|
|
|
|
#7 |
|
Advanced Senior Member
Join Date: Mar 2010
Location: Upper Yukon, Alaska
Posts: 1,820
|
Another plexiglass stand question?
I'm finishing up a new stand that we're hauling 6 miles back in and setting up at base of mnt, on a big mineral lick, spring/swamp. Floor is sheet of plywood, and it's 20 foot up a ladder, ladder is 3/16 two inch sq tube, heavy duty; steel frame alone weighs over 600 lbs. So what's the best way to set in plexiglass windows to slide, (for the sides and rear panels). I figure you can buy grooved bases the windows will fit in, so you can screw into plywood. Kinda waiting for huntin season to get over with and first snow so swamp freezes hard; then we''ll haul her out there. Moose, caribou, wolves, lynx hit the area and some of the local Indians and I plan on spending time out there early winter, try to get some wolves with foxpro. |
|
|
|
|
|
#8 | |
|
Senior Member
Join Date: Feb 2012
Location: Texas
Contributor
Posts: 677
|
Quote:
I mounted the strips horizontally along the top and bottom of the window frame I spaced them vertically so that the plexi glass can be lifted up and out of the groove for replacement if needed The grooves let the windows slide back and forth little effort and no noise hardly the plexi fits so good that bugs can't get in also |
|
|
|
|
|
|
#9 |
|
Advanced Senior Member
Join Date: Feb 2004
Location: Dardanelle, AR
Contributor
Posts: 2,029
|
That's how we have done it before.
If you arent worried about the weather, the camo netting is awesome. We have had turkey right on us and not be able to see us through it. As long as the light isnt shining directly in on you and you arent backlit, nothing will see you.
__________________
Gainfully employed= shooting somebody elses bullets and getting paid for it Country101 |
|
|
|
|
|
#10 |
|
Advanced Senior Member
Join Date: Nov 2011
Posts: 2,067
|
I kind of like the screen on outside idea. it would break up the sun's rays. maybe slant them upwards a bit as well.
but I gotta ask. do the deer care about a glare? if it's left there for them to get accustomed to it will it make a difference? many times they come near houses which I am sure have glare producing windows.
__________________
I'll go defenseless when our leaders do the same |
|
|
|
|
|
#11 |
|
Advanced Senior Member
Join Date: Feb 2004
Location: Dardanelle, AR
Contributor
Posts: 2,029
|
The only reason it would matter if it is moving. Sitting still, it wouldnt matter, but if you are hunting and it suddenly flashes, they will be on you. Sliding windows wont be as prone to this as ones that are hinged, but still, if they see the glare suddenly removed from a portion when it is slid out of the way, it could be enough to tip them off.
__________________
Gainfully employed= shooting somebody elses bullets and getting paid for it Country101 |
|
|
|
|
|
#12 | |
|
Senior Member
Join Date: Feb 2012
Location: Texas
Contributor
Posts: 677
|
Quote:
once it has been there a few more weeks, it probly won't matter to them |
|
|
|
|
![]() |
| Thread Tools | |
|
|