Selecting an Outside Neck Turning Tool - The Firearms Forum

dayooper · 10-12-2012, 03:25 PM

I've been researching hand held outside neck turners and narrowed it down to either the RCBS or Forster unit. Will be using for 308 and 270 brass. I would appreciate feedback from those experienced with this process and which one you would prefer as to features, quality, and ease of use.

Since some reviewers don't like the shellholders that come with these units, I'll probably use the Lee shellholder and stud that can be chucked into a cordless screwdriver.

10-12-2012, 03:25 PM	#1
dayooper Member Join Date: Sep 2012 Posts: 10	Selecting an Outside Neck Turning Tool I've been researching hand held outside neck turners and narrowed it down to either the RCBS or Forster unit. Will be using for 308 and 270 brass. I would appreciate feedback from those experienced with this process and which one you would prefer as to features, quality, and ease of use. Since some reviewers don't like the shellholders that come with these units, I'll probably use the Lee shellholder and stud that can be chucked into a cordless screwdriver. --> Last edited by dayooper; 10-12-2012 at 03:28 PM.. Reason: wording