remove op rod from sks for ? manual bolt action? - The Firearms Forum

soundguy · 11-10-2012, 05:21 PM

anyone ever heard of doing this? removing the piston to make it a manually cycled bolt?

any reason why?

and if done.. is there a block off for the gas port? or does it just blow freely?

Helix_FR · 11-11-2012, 09:21 AM

Thats funny you posted this bc I just got one in the guy just bought complaining it didnt cycle. Op rod was gone. Hopefully your gas piston was removed too otherwise it just flies back into the rear sight housing and sticks there. The yugo SKS had a gas valve to turn the gun to single shot but it was only for the attachment of the grenade launcher. Some claim that the SKS is more accurate when in single shot mode. I don't believe that is the case. I think was it is the recoil is much reduced bc you do have 2 lbs of steel flying back at you. WO the op rod it will just vent out the hole at the bolt face but kinda close to your face.

JLA · 11-11-2012, 12:21 PM

I wouldnt recommend it. Removing the op rod would remove the spring tension that rebounds the gas piston and cause severe battering. If you need a bolt action rifle that bad just buy one..

mogunner · 11-12-2012, 12:02 AM

it's done in some countries where semi-auto's are illegal to own.

soundguy · 11-12-2012, 08:45 AM

Quote:

Originally Posted by JLA

I wouldnt recommend it. Removing the op rod would remove the spring tension that rebounds the gas piston and cause severe battering. If you need a bolt action rifle that bad just buy one..

i didn't 'need' one.

but have a sks.. that me and my buddy traded for.

it DOES happen to be a yugo and have a grenade launcher ( 59/66? maybee )..

we were perplexed about it a bit...

JLA · 11-12-2012, 08:57 PM

Oh then just turn the gas port off. Button in the 12 o clock position

polishshooter · 11-12-2012, 10:56 PM

I knew a guy years ago that hunted deer in PA with a Mini-14.

PA does not allow Semi-Autos for hunting.

He had drilled and tapped his gas port and inserted a threaded set screw, and used it as a manually operated "bolt gun" and kept getting stopped by game wardens and checked but was never charged sice he could prove it was "manually operated."

The only complaint he had was when he removed the set screw and fired it semi auto normally at the range, that he had a helluva time cleaning the crud out of the threads in the gas port to reinsert the set screw for hunting.

So I would guess if you removed the op rod, it would be legal to hunt with in PA at least....

soundguy · 11-14-2012, 07:16 AM

i've got a regular sks parts book.. i need to get one for this yugo though... am not getting the gas port shutoff to work and don't want to force anything till I can see what i am doing

11-10-2012, 05:21 PM	#1
soundguy Advanced Senior Member Join Date: May 2012 Location: florida Contributor Posts: 4,441	remove op rod from sks for ? manual bolt action? anyone ever heard of doing this? removing the piston to make it a manually cycled bolt? any reason why? and if done.. is there a block off for the gas port? or does it just blow freely? -->

11-11-2012, 09:21 AM	#2
Helix_FR TFF Moderator/Host Join Date: Apr 2009 Location: Imperial, MO Posts: 3,624	Re: remove op rod from sks for ? manual bolt action? Thats funny you posted this bc I just got one in the guy just bought complaining it didnt cycle. Op rod was gone. Hopefully your gas piston was removed too otherwise it just flies back into the rear sight housing and sticks there. The yugo SKS had a gas valve to turn the gun to single shot but it was only for the attachment of the grenade launcher. Some claim that the SKS is more accurate when in single shot mode. I don't believe that is the case. I think was it is the recoil is much reduced bc you do have 2 lbs of steel flying back at you. WO the op rod it will just vent out the hole at the bolt face but kinda close to your face. __________________ Only cowards shoot with their eyes closed.... helixgunsmith.com

11-11-2012, 12:21 PM	#3
JLA TFF Moderator/Host Join Date: Feb 2007 Location: Heart Of Texas Contributor Posts: 17,317	Re: remove op rod from sks for ? manual bolt action? I wouldnt recommend it. Removing the op rod would remove the spring tension that rebounds the gas piston and cause severe battering. If you need a bolt action rifle that bad just buy one.. __________________ It takes 43 muscles to frown, 17 to smile, and 3 for proper trigger squeeze. The latest caliber or gear is no substitute for experience and skill. Rifles and cartridges don't make hits -- shooters do. Fact of life: After Monday and Tuesday, even the calendar says WTF!

11-12-2012, 12:02 AM	#4
mogunner Advanced Senior Member Join Date: Oct 2011 Location: Eastern Missouri Posts: 1,027	Re: remove op rod from sks for ? manual bolt action? it's done in some countries where semi-auto's are illegal to own.

11-12-2012, 08:57 PM	#6
JLA TFF Moderator/Host Join Date: Feb 2007 Location: Heart Of Texas Contributor Posts: 17,317	Re: remove op rod from sks for ? manual bolt action? Oh then just turn the gas port off. Button in the 12 o clock position __________________ It takes 43 muscles to frown, 17 to smile, and 3 for proper trigger squeeze. The latest caliber or gear is no substitute for experience and skill. Rifles and cartridges don't make hits -- shooters do. Fact of life: After Monday and Tuesday, even the calendar says WTF!

11-12-2012, 10:56 PM	#7
polishshooter Advanced Senior Member Join Date: Mar 2001 Location: Indiana Contributor Posts: 7,860	Re: remove op rod from sks for ? manual bolt action? I knew a guy years ago that hunted deer in PA with a Mini-14. PA does not allow Semi-Autos for hunting. He had drilled and tapped his gas port and inserted a threaded set screw, and used it as a manually operated "bolt gun" and kept getting stopped by game wardens and checked but was never charged sice he could prove it was "manually operated." The only complaint he had was when he removed the set screw and fired it semi auto normally at the range, that he had a helluva time cleaning the crud out of the threads in the gas port to reinsert the set screw for hunting. So I would guess if you removed the op rod, it would be legal to hunt with in PA at least.... __________________ The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living.

11-14-2012, 07:16 AM	#8
soundguy Advanced Senior Member Join Date: May 2012 Location: florida Contributor Posts: 4,441	Re: remove op rod from sks for ? manual bolt action? i've got a regular sks parts book.. i need to get one for this yugo though... am not getting the gas port shutoff to work and don't want to force anything till I can see what i am doing