Feg PMK - The Firearms Forum

Milsurpguy · 12-09-2012, 10:05 PM

Hi folks new to this forum. I'm wondering about a Feg PMK 380 I got on a whim today. It seems well made in like new condition, with 2 magazines for 250. My question is how good are these, and are there any issues i should watch for? Thanks.

RJay · 12-09-2012, 10:20 PM

Didn't I just see the almost identical question on another forum with answers, perhaps the firing line forum.

Milsurpguy · 12-09-2012, 11:09 PM

Quote:

Originally Posted by RJay

Didn't I just see the almost identical question on another forum with answers, perhaps the firing line forum.

Yes you did but im a information junkie, one reply is just not enough for me to analyze opinions. I had to change my screen name the other was in use. Sorry if i offend anyone by posting it here as well.

RJay · 12-10-2012, 01:12 PM

No offence, just a little grin

lead · 12-10-2012, 05:52 PM

FEG's are fine pistols. I've owned a PA 63 in 9mm Mak and a AP7 in .32auto. Both were reliable and accurate.

Milsurpguy · 12-11-2012, 09:20 AM

Quote:

Originally Posted by lead

FEG's are fine pistols. I've owned a PA 63 in 9mm Mak and a AP7 in .32auto. Both were reliable and accurate.

Thanks lead. Any idea if it can handle that cheap russian tullammo stuff. Looking for something cheap to shoot.

RJay · 12-11-2012, 01:29 PM

Your gun is 9MM/.380, it should handle any commercial ammunition that is available. They are unauthorized copies of the Walther PP except more roughly made. They are copies, not clones and parts will not interchange. It is a proven design and shouldn't give you any problems. Holsters made for the Walther PP will fit. The biggest problem that occurs on the FEG is usually magazine related. Take down is the same as the PP.

Milsurpguy · 12-11-2012, 03:44 PM

Quote:

Originally Posted by RJay

Your gun is 9MM/.380, it should handle any commercial ammunition that is available. They are unauthorized copies of the Walther PP except more roughly made. They are copies, not clones and parts will not interchange. It is a proven design and shouldn't give you any problems. Holsters made for the Walther PP will fit. The biggest problem that occurs on the FEG is usually magazine related. Take down is the same as the PP.

Thanks RJay I think I will give it a try.

Mosin_Nagant_Fan · 12-11-2012, 04:38 PM

I had a similar gun, neat little gun, it was a S. African police trade-in and was in .380. I since sold it and now have an XD9. The only irk I had was with the aluminum frame, which I felt every round fired on the 2nd joint on my thumb.

SARGE7402 · 01-19-2013, 06:39 PM

I've owned sevral including the PA-63 Several SMCs and the PMK. All are good guns and very reliable. The aluminum frame does increase the felt recoil, but the otherside of the coin is they are very light to carry. I've still got two SMC (these were PPK size) one in .22 and one in 9x18.

12-09-2012, 10:05 PM	#1
Milsurpguy Member Join Date: Dec 2012 Posts: 5	Feg PMK Hi folks new to this forum. I'm wondering about a Feg PMK 380 I got on a whim today. It seems well made in like new condition, with 2 magazines for 250. My question is how good are these, and are there any issues i should watch for? Thanks. -->

12-09-2012, 10:20 PM	#2
RJay Advanced Senior Member Join Date: Feb 2004 Location: Arizona Posts: 3,487	Re: Feg PMK Didn't I just see the almost identical question on another forum with answers, perhaps the firing line forum. __________________ RonJames

12-10-2012, 01:12 PM	#4
RJay Advanced Senior Member Join Date: Feb 2004 Location: Arizona Posts: 3,487	Re: Feg PMK No offence, just a little grin __________________ RonJames

12-10-2012, 05:52 PM	#5
lead Advanced Senior Member Join Date: May 2004 Location: Missouri Posts: 1,522	Re: Feg PMK FEG's are fine pistols. I've owned a PA 63 in 9mm Mak and a AP7 in .32auto. Both were reliable and accurate. __________________ The best things in life, are not things.

12-11-2012, 01:29 PM	#7
RJay Advanced Senior Member Join Date: Feb 2004 Location: Arizona Posts: 3,487	Re: Feg PMK Your gun is 9MM/.380, it should handle any commercial ammunition that is available. They are unauthorized copies of the Walther PP except more roughly made. They are copies, not clones and parts will not interchange. It is a proven design and shouldn't give you any problems. Holsters made for the Walther PP will fit. The biggest problem that occurs on the FEG is usually magazine related. Take down is the same as the PP. __________________ RonJames

12-11-2012, 04:38 PM	#9
Mosin_Nagant_Fan Advanced Senior Member Join Date: Jan 2007 Location: Montgomery, AL Posts: 1,832	Re: Feg PMK I had a similar gun, neat little gun, it was a S. African police trade-in and was in .380. I since sold it and now have an XD9. The only irk I had was with the aluminum frame, which I felt every round fired on the 2nd joint on my thumb. __________________ Long Gun Collection: M38 Mosin-Nagant Carbine Russian 1950 SKS Winchester 1300 20Ga Western Field Single-Shot 16Ga Sears Ranger .22S-L-LR Bolt-Action Rifle Marlin 795 Semi-Auto (Brother's) Handgun Collection: Springfield Armory XD9 Service

01-19-2013, 06:39 PM	#10
SARGE7402 V.I.P. Member Join Date: Dec 2009 Location: Virginia Posts: 121	Re: Feg PMK I've owned sevral including the PA-63 Several SMCs and the PMK. All are good guns and very reliable. The aluminum frame does increase the felt recoil, but the otherside of the coin is they are very light to carry. I've still got two SMC (these were PPK size) one in .22 and one in 9x18.