Hornady Lock and Load. Anyone use it?

The Joker · 11-24-2012, 06:48 PM

Like the title says. I recently picked one up but I am having trouble with the case feeder.
I got everything to work but when it comes time to drop on the tray that slides to the shell holder, it drops 3 to 4 cases. What do I need to do to get it drop just 1 case each time?

GCSOA38 · 11-25-2012, 01:12 AM

I have a lock N load AP and love it. Although it took some time to get it set up and running flawless (priming issues mostly). However I don't use a case feeder so i can't help you there. I know many others do use one and should be able to chime in and shed some light on your issue(s). Best of luck

gun-nut · 11-25-2012, 03:29 PM

Adjust the threaded feed tube down. You have to big of a gap. This is a pick of where i have it set for 380 auto. This will change with the cal. you are doing.

noylj · 11-29-2012, 07:15 PM

As with any press problem, call the manufacturer. They love to help and need to know of any problems.
Reading the directions is very important and, when available, watching a video helps a lot. See if there are any videos on the Hornady site or on YouTube.
My L-N-L was totally trouble free, but I didn't get a case collator/feeder and would prefer to grind that off the sub-plate.

soundguy · 11-29-2012, 07:30 PM

and if nothing else.. .. they probably have great tech support. I know RCBS does..

11-24-2012, 06:48 PM	#1
The Joker V.I.P. Member Join Date: Nov 2012 Posts: 75	Hornady Lock and Load. Anyone use it? Like the title says. I recently picked one up but I am having trouble with the case feeder. I got everything to work but when it comes time to drop on the tray that slides to the shell holder, it drops 3 to 4 cases. What do I need to do to get it drop just 1 case each time? -->

11-25-2012, 01:12 AM	#2
GCSOA38 Member Join Date: Oct 2012 Posts: 20	Re: Hornady Lock and Load. Anyone use it? I have a lock N load AP and love it. Although it took some time to get it set up and running flawless (priming issues mostly). However I don't use a case feeder so i can't help you there. I know many others do use one and should be able to chime in and shed some light on your issue(s). Best of luck

11-25-2012, 03:29 PM	#3
gun-nut Senior Member Join Date: Jan 2011 Location: ohio Contributor Posts: 931	Re: Hornady Lock and Load. Anyone use it? Adjust the threaded feed tube down. You have to big of a gap. This is a pick of where i have it set for 380 auto. This will change with the cal. you are doing. Attached Images __________________ Don't retreat just reload. Last edited by gun-nut; 11-25-2012 at 03:37 PM..

11-29-2012, 07:15 PM	#4
noylj V.I.P. Member Join Date: Jul 2007 Posts: 113	Re: Hornady Lock and Load. Anyone use it? As with any press problem, call the manufacturer. They love to help and need to know of any problems. Reading the directions is very important and, when available, watching a video helps a lot. See if there are any videos on the Hornady site or on YouTube. My L-N-L was totally trouble free, but I didn't get a case collator/feeder and would prefer to grind that off the sub-plate.

11-29-2012, 07:30 PM	#5
soundguy Advanced Senior Member Join Date: May 2012 Location: florida Contributor Posts: 4,399	Re: Hornady Lock and Load. Anyone use it? and if nothing else.. .. they probably have great tech support. I know RCBS does..