.410 double help

me2 · 12-09-2012, 07:49 PM

hi yall, i need some help i have a stevens .410 double that i want to fix so im looking for year and such, below is the info....

on the right side of the recever it says Stevens model 311D savage arms westfield massU.S.A.

nothing on the bottom or left side of the receiver

on the right barrel it says selected forged steel =7v)
on the left barrel it says proof tested .410 bore 3" chamber 5v)

that is all i see i dont see any serial numbers

it was my dads gun and it was in a fire so i want to get new wood for it and a spring kit, dad is gone now and id like to fix it up. thanks for any help...

PS: i know that its not that safest thin to do to shoot a burnt gun but i have test fired several shots through it and its holding together fine (i just have to keep stretching the springs so it hits hard enough to fire)

thanks

me2 · 12-10-2012, 10:03 AM

so 137 people have read this and nobody knows anything about this gun?

soundguy · 12-10-2012, 10:23 AM

have you checked numrich?

http://www.gunpartscorp.com/Manufact...311D-33991.htm

out of safety.. I'd add that I'd have the gun checked by a competent gunsmth as to being safe to use.. etc...

me2 · 12-10-2012, 10:34 AM

Quote:

Originally Posted by soundguy

have you checked numrich?

http://www.gunpartscorp.com/Manufact...311D-33991.htm

out of safety.. I'd add that I'd have the gun checked by a competent gunsmth as to being safe to use.. etc...

thanks il go look

packetsplace · 12-10-2012, 02:15 PM

The Stevens mod 311 is a utility grade gun. Nothing fancy but sturdy. I would have it checked by a gunsmith before you proceed. What condition are the stocks in? You may be able to refinish. I prefer to do this if I can to the guns I restore. It retains alot of the character.

RJay · 12-10-2012, 02:39 PM

Quote:

Originally Posted by me2

so 137 people have read this and nobody knows anything about this gun?

Patience little grasshopper, the world does not revolve around you, I know that is a shock to your ego, but true none the less.

me2 · 12-10-2012, 02:49 PM

Quote:

Originally Posted by packetsplace

The Stevens mod 311 is a utility grade gun. Nothing fancy but sturdy. I would have it checked by a gunsmith before you proceed. What condition are the stocks in? You may be able to refinish. I prefer to do this if I can to the guns I restore. It retains alot of the character.

wood was about 50% gone

so i got to get new ones or used ones. thanks

12-09-2012, 07:49 PM	#1
me2 Member Join Date: Feb 2010 Posts: 21	.410 double help hi yall, i need some help i have a stevens .410 double that i want to fix so im looking for year and such, below is the info.... on the right side of the recever it says Stevens model 311D savage arms westfield massU.S.A. nothing on the bottom or left side of the receiver on the right barrel it says selected forged steel =7v) on the left barrel it says proof tested .410 bore 3" chamber 5v) that is all i see i dont see any serial numbers it was my dads gun and it was in a fire so i want to get new wood for it and a spring kit, dad is gone now and id like to fix it up. thanks for any help... PS: i know that its not that safest thin to do to shoot a burnt gun but i have test fired several shots through it and its holding together fine (i just have to keep stretching the springs so it hits hard enough to fire) thanks -->

12-10-2012, 10:03 AM	#2
me2 Member Join Date: Feb 2010 Posts: 21	Re: .410 double help so 137 people have read this and nobody knows anything about this gun?

12-10-2012, 10:23 AM	#3
soundguy Advanced Senior Member Join Date: May 2012 Location: florida Contributor Posts: 4,405	Re: .410 double help have you checked numrich? http://www.gunpartscorp.com/Manufact...311D-33991.htm out of safety.. I'd add that I'd have the gun checked by a competent gunsmth as to being safe to use.. etc... Last edited by soundguy; 12-10-2012 at 10:25 AM..

12-10-2012, 02:15 PM	#5
packetsplace V.I.P. Member Join Date: Jun 2008 Location: Florida Posts: 161	Re: .410 double help The Stevens mod 311 is a utility grade gun. Nothing fancy but sturdy. I would have it checked by a gunsmith before you proceed. What condition are the stocks in? You may be able to refinish. I prefer to do this if I can to the guns I restore. It retains alot of the character.