Thanks to Inplanotx!! - The Firearms Forum

frosty · 01-20-2004, 02:04 PM

Again a big Thank You goes out to Rick for helping me and providing me with a list of what I will need to start to cast my own stuff.

His response time is perfect. I post a question and Plano tosses an answer in no time at all. "Johnny on the Spot" comes to mind as the correct description. This also goes for the rest of you guys out there who have offered your sage advice to us green horns fresh in from camp.

In all seriousness, Thanks to ALL of You.

Patrick

inplanotx · 01-20-2004, 02:11 PM

We are always glad to help. Now, hit the damn bank and go back and get more wheel weights at 22 cents per pound. Stop off at a plumbers supply store and pick up 14 pounds of 50/50 bar solder and then go home and start mixing lead and cleaning it up. Don't forget, wheel weighs will have dirt embedded in them and this needs to be cleaned out and the clips disgarded. Have fun and call if y'all need to .

Rick

frosty · 01-21-2004, 11:45 AM

I get paid this Friday. You can bet on what I will buy that same afternoon.

01-20-2004, 02:04 PM	#1
frosty V.I.P. Member Join Date: Mar 2003 Location: Texas Posts: 374	Thanks to Inplanotx!! Again a big Thank You goes out to Rick for helping me and providing me with a list of what I will need to start to cast my own stuff. His response time is perfect. I post a question and Plano tosses an answer in no time at all. "Johnny on the Spot" comes to mind as the correct description. This also goes for the rest of you guys out there who have offered your sage advice to us green horns fresh in from camp. In all seriousness, Thanks to ALL of You. Patrick __________________ BEER POCKET BOOK ASSOCIATION OF TEXAS -->

01-20-2004, 02:11 PM	#2
inplanotx Advanced Senior Member Join Date: Jan 2002 Location: Texas Posts: 8,897	We are always glad to help. Now, hit the damn bank and go back and get more wheel weights at 22 cents per pound. Stop off at a plumbers supply store and pick up 14 pounds of 50/50 bar solder and then go home and start mixing lead and cleaning it up. Don't forget, wheel weighs will have dirt embedded in them and this needs to be cleaned out and the clips disgarded. Have fun and call if y'all need to . Rick __________________

01-21-2004, 11:45 AM	#3
frosty V.I.P. Member Join Date: Mar 2003 Location: Texas Posts: 374	I get paid this Friday. You can bet on what I will buy that same afternoon. __________________ BEER POCKET BOOK ASSOCIATION OF TEXAS