|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
Adnanced Senior Member
Posts: n/a
|
mterick
Member Posts: 6 (1/3/02 11:32:30 pm) Reply | Edit | Del All T/C Firestorm .50cal -------------------------------------------------------------------------------- I just bought a T/C Firestorm .50 cal flintlock at *********.com. (delivered $235) It's in excellent condtion. I just took it out of the box. I was wondering if anyone could recomend load/patch, or anything else about this gun. I plan on trying .490 round ball with different patches and working up the charge from 75 2f Goex BP. I'll figure out what's best, but advice can be a welcome shortcut too. I'm curious about conicals. Thanks for the help! IShootBack Member Posts: 10 (9/26/02 6:59:36 pm) Reply | Edit | Del Re: T/C Firestorm .50cal -------------------------------------------------------------------------------- The barel twist is to fast for round balls in newer Firestorms. I'd try conicals or maxi-balls - and start at 70 to 75 grains of FFG and work from there. Every BP gun will have a bullet and load that works best in your particular gun - it takes lots of range time testing cleaning and documenting your load to learn what works and what does not. Good Luck. ISB kdub01 *TFF Senior Staff* Posts: 1165 (9/26/02 8:22:22 pm) Reply | Edit | Del Re: T/C Firestorm .50cal -------------------------------------------------------------------------------- Have owned several T/C BP rifles - they all seemed to prefer the 365 - 385 gr conicals with about 90 gr FFG bp and a musket cap for ignition. "Keep Off The Ridgeline"
-->
|
|
![]() |
| Thread Tools | |
|
|