Wrong thread? - The Firearms Forum

Green · 06-02-2006, 05:42 PM

I posted a question on the tech. questions thread about the CZ52 barrell. No bites. Soooo......being that the CZ is a c&r,perhaps someome might know a bit more here. One of the roller berrings falls out and jams the action. Do I have to get the whole new barrell and all? What is the best course for me to follow?Thanks for any help.

Light Coat · 06-02-2006, 11:59 PM

Those bearings are suppused to be held in by the slip ring. This sounds particularly nasty. Sounds to my like something is wrong with the ring; not the barrel. Maybe a picture of the barrel assembly and relevant parts?? I used to own a bunch of 52's and this just is not something I have seen happen. Most often the problem that crops up is the pin coming out of the barrel catch and the pistol falling apart while being operated.

southernshooter · 06-03-2006, 12:44 AM

Hold em' in place with Duct Tape

. The good thing about the 52's is they have a decent size aftermarket. Barrels, little bearings and slip rings ain't to hard to find.

Green · 06-03-2006, 11:46 AM

Thankyou much. I guess i'll check around for the "slip ring". I tried the duck tape. It's only good for a couple hundred rounds.

southernshooter · 06-03-2006, 09:01 PM

Green ya gotta use the high heat exhaust tape

Green · 06-04-2006, 09:53 AM

That'l work Southern. Ahh technology!

Pistolenschutze · 06-04-2006, 01:42 PM

Green, for what it might be worth to you, I noticed J&G has replacement firing pins available for the CZ52s right now, priced at $9.99 apiece. Always nice to have a few spares. http://www.jgsales.com/

Green · 06-04-2006, 02:36 PM

Quote:

Originally Posted by Pistolenschutze

Green, for what it might be worth to you, I noticed J&G has replacement firing pins available for the CZ52s right now, priced at $9.99 apiece. Always nice to have a few spares. http://www.jgsales.com/

Thanks Pistolenschutze. I'll check into it. I think I may have to get it in shootable condition first though. Can't break a firing pin untill then.

southernshooter · 06-04-2006, 09:57 PM

Hey GREEN a piece of advice. Why don't you buy another gun take which ever one is in better shape shoot it and use the other as a parts gun

Light Coat · 06-04-2006, 10:41 PM

I'd avoid the old cast pins. There was a stainless on the market that ran about $25; I did not break one of those. The 52's are cheap enough every guy should buy 3 and shoot one.

Green · 06-05-2006, 01:39 PM

Yes indeed,I have thought of just buying anothher one. But $$$wife$$$$wife$$$ kinda puts a hold on that for now.

southernshooter · 06-05-2006, 10:32 PM

We have all been their Green

06-02-2006, 05:42 PM	#1
Green V.I.P. Member Join Date: Apr 2006 Location: The South Posts: 118	Wrong thread? I posted a question on the tech. questions thread about the CZ52 barrell. No bites. Soooo......being that the CZ is a c&r,perhaps someome might know a bit more here. One of the roller berrings falls out and jams the action. Do I have to get the whole new barrell and all? What is the best course for me to follow?Thanks for any help. -->

06-02-2006, 11:59 PM	#2
Light Coat V.I.P. Member Join Date: Mar 2006 Location: Middle of Nowhere, KS Posts: 466	Re: Wrong thread? Those bearings are suppused to be held in by the slip ring. This sounds particularly nasty. Sounds to my like something is wrong with the ring; not the barrel. Maybe a picture of the barrel assembly and relevant parts?? I used to own a bunch of 52's and this just is not something I have seen happen. Most often the problem that crops up is the pin coming out of the barrel catch and the pistol falling apart while being operated.

06-03-2006, 12:44 AM	#3
southernshooter Advanced Senior Member Join Date: Mar 2006 Location: Deep South Mississippi Posts: 5,943	Re: Wrong thread? Hold em' in place with Duct Tape . The good thing about the 52's is they have a decent size aftermarket. Barrels, little bearings and slip rings ain't to hard to find. __________________ Only you can see this

06-03-2006, 11:46 AM	#4
Green V.I.P. Member Join Date: Apr 2006 Location: The South Posts: 118	Re: Wrong thread? Thankyou much. I guess i'll check around for the "slip ring". I tried the duck tape. It's only good for a couple hundred rounds.

06-03-2006, 09:01 PM	#5
southernshooter Advanced Senior Member Join Date: Mar 2006 Location: Deep South Mississippi Posts: 5,943	Re: Wrong thread? Green ya gotta use the high heat exhaust tape __________________ Only you can see this

06-04-2006, 09:53 AM	#6
Green V.I.P. Member Join Date: Apr 2006 Location: The South Posts: 118	Re: Wrong thread? That'l work Southern. Ahh technology!

06-04-2006, 01:42 PM	#7
Pistolenschutze Advanced Senior Member Join Date: Nov 2005 Location: Colorado Posts: 13,094	Re: Wrong thread? Green, for what it might be worth to you, I noticed J&G has replacement firing pins available for the CZ52s right now, priced at $9.99 apiece. Always nice to have a few spares. http://www.jgsales.com/ __________________ --Pistolenschutze (Pistol Shooter)

06-04-2006, 09:57 PM	#9
southernshooter Advanced Senior Member Join Date: Mar 2006 Location: Deep South Mississippi Posts: 5,943	Re: Wrong thread? Hey GREEN a piece of advice. Why don't you buy another gun take which ever one is in better shape shoot it and use the other as a parts gun __________________ Only you can see this

06-04-2006, 10:41 PM	#10
Light Coat V.I.P. Member Join Date: Mar 2006 Location: Middle of Nowhere, KS Posts: 466	Re: Wrong thread? I'd avoid the old cast pins. There was a stainless on the market that ran about $25; I did not break one of those. The 52's are cheap enough every guy should buy 3 and shoot one.

06-05-2006, 01:39 PM	#11
Green V.I.P. Member Join Date: Apr 2006 Location: The South Posts: 118	Re: Wrong thread? Yes indeed,I have thought of just buying anothher one. But $$$wife$$$$wife$$$ kinda puts a hold on that for now.

06-05-2006, 10:32 PM	#12
southernshooter Advanced Senior Member Join Date: Mar 2006 Location: Deep South Mississippi Posts: 5,943	Re: Wrong thread? We have all been their Green __________________ Only you can see this