need parts for restoration!

rooster5
Member
Posts: 2
(4/3/02 3:55:52 pm)
Reply | Edit | Del All need parts for restoration!
--------------------------------------------------------------------------------
hello everyone:i'm new to this sight
i am presently restoreing a 12 ga dbl.brl.shot gun,it is a j.stevens arms co model 250,with hammers,and steel barrels.
i need the screws that secure the hammers to the tumblers.as the origonal screws have been replaced with no.6x32 machine screwwa and washers,i would be greatful if anyone could help me locate parts for this old gun.
i would also be intrested in buying another mod.250 for parts can anyone help me out.
thanks: NORSE COURTNEY

Tac401
Administrator
Posts: 4051
(4/3/02 6:54:16 pm)
Reply | Edit | Del
ezSupporter
Re: need parts for restoration!
--------------------------------------------------------------------------------
Welcome aboard Norse, someone will be along
shortly to add more to this but have you tried
www.gunpartscorp.com/ yet?
TFF VMBB Email Tac

cointoss 2
*TFF Staff*
Posts: 578
(4/3/02 7:03:42 pm)
Reply | Edit | Del Re: need parts for restoration!
--------------------------------------------------------------------------------
What he says, gunparts is a good place to look and welcome.
cointoss2

polishshooter
*TFF Senior Staff*
Posts: 3275
(4/3/02 8:54:52 pm)
Reply | Edit | Del Re: need parts for restoration!
--------------------------------------------------------------------------------
Welcome Rooster...

Type in "J. Stevens-Parts" at the bottom of this page in the "Google Search" and hit "search" and see what comes up, if nothing, then type in "Shotgun parts" or whatever and keep trying, you might get a couple of pages of links to places where you can get the parts....

You will be surprised what you will find using Google....
"Don't hear him call you an ---hole, hear WHY he's calling you an ---hole." -------- From "A Season on the Brink"