|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
V.I.P. Member
Join Date: Jul 2005
Posts: 215
|
Does anyone have Hornady load info for the .223 using 4198? I just bought a new Remginton 700 SPS along with a box of Hornady V-max 50 grain bullets and a pound of IMR 4198 and I'm looking for load info on these bullets.
-->
|
|
|
|
|
|
#2 |
|
Advanced Senior Member
Join Date: Aug 2005
Location: Bay Point, Kali..aka Gun Point
Posts: 5,016
|
The Hornady website should have that info handy. Just Google Hornady
![]()
__________________
A bad day @ the Range, is better than a good day @ work. |
|
|
|
|
|
#3 |
|
Advanced Senior Member
Join Date: Dec 2005
Contributor
Posts: 1,764
|
The Hornady manual list the 50 grain V-max bullet with IMR-4198:
19.5 grains = 2900 fps 20.2 grains = 3000 fps 20.9 grains = 3100 fps 21.6 grains = 3200 fps 22.2 grains = 3300 fps & is Max load. Rifle for testing was Rem 700 26" barrel Winchester cases Winchester WSR primer. Max C.O.L = 2.260" Max case length = 1.760" Case trim length = 1.750 |
|
|
|
|
|
#4 | |
|
V.I.P. Member
Join Date: Jul 2005
Posts: 215
|
Quote:
![]() |
|
|
|
|
![]() |
| Thread Tools | |
|
|