Winchester Model 310- what size rings? - The Firearms Forum

Smokin Guns · 03-09-2003, 08:24 AM

Turkey Creek
Member
Posts: 1
(1/26/03 11:02:12 pm)
Reply Winchester Model 310- what size rings?
--------------------------------------------------------------------------------
Sirs- I have a pristene Winchester Model 310, given to me unfiredby my father- I plan to mount a Bushnell Sportview 4x12 with 40 mm AO- what are you suggestions for ther rings to be use here- preferably windage adjustable- thanks in advance

Edited by: Turkey Creek at: 1/26/03 11:06:04 pm

warpig883
*TFF Staff*
Posts: 6026
(1/27/03 9:59:05 am)
Reply
ezSupporter
Re: Winchester Model 310- what size rings?
--------------------------------------------------------------------------------
Welcome to TFF Turkey Creek

You do not say anything about the see thru rings so I am guessing you do not want those. I am not familiar with that particular rifle but I think with the 40mm bell on the end you will need the medium height.

Ignorance is a crime in 49 states. In the other one it is bliss.

AntiqueDr
*TFF Senior Staff*
Posts: 3269
(1/27/03 10:06:57 am)
Reply
ezSupporter
Re: Winchester Model 310- what size rings?
--------------------------------------------------------------------------------
If I remember right, the Winchester 310 is a single-shot .22 bolt action. The receiver is grooved for tip-off mounts. To mount that scope, you are undoubtedly going to need 1" diameter high tip-off rings. None are adjustable for windage.

kdub01
*TFF Senior Staff*
Posts: 1917
(1/27/03 1:08:48 pm)
Reply Re: Winchester Model 310- what size rings?
--------------------------------------------------------------------------------
Millet makes clamp-on rings to fit the grooved receiver, and they have the ability to make windage adjustments. These are available at just about any of the better mail-order places.
"Keep Off The Ridgeline"

AntiqueDr
*TFF Senior Staff*
Posts: 3271
(1/27/03 2:17:17 pm)
Reply
ezSupporter
Re: Winchester Model 310- what size rings?
--------------------------------------------------------------------------------
Yep, had forgotten about the Millett Angle-Lok. They do have a degree of windage adjustment. Make sure you get the Angle-Lok, they offer another type of tip-off ring that is not adjustable.

Here is a link to their catalog page:
www.millettsights.com/catp13.htm

03-09-2003, 08:24 AM	#1
Smokin Guns Advanced Senior Member Join Date: Jul 2002 Location: "Gun Culture Members Clubhouse"... Posts: 4,463	Winchester Model 310- what size rings? Turkey Creek Member Posts: 1 (1/26/03 11:02:12 pm) Reply Winchester Model 310- what size rings? -------------------------------------------------------------------------------- Sirs- I have a pristene Winchester Model 310, given to me unfiredby my father- I plan to mount a Bushnell Sportview 4x12 with 40 mm AO- what are you suggestions for ther rings to be use here- preferably windage adjustable- thanks in advance Edited by: Turkey Creek at: 1/26/03 11:06:04 pm warpig883 TFF Staff Posts: 6026 (1/27/03 9:59:05 am) Reply ezSupporter Re: Winchester Model 310- what size rings? -------------------------------------------------------------------------------- Welcome to TFF Turkey Creek You do not say anything about the see thru rings so I am guessing you do not want those. I am not familiar with that particular rifle but I think with the 40mm bell on the end you will need the medium height. Ignorance is a crime in 49 states. In the other one it is bliss. AntiqueDr TFF Senior Staff Posts: 3269 (1/27/03 10:06:57 am) Reply ezSupporter Re: Winchester Model 310- what size rings? -------------------------------------------------------------------------------- If I remember right, the Winchester 310 is a single-shot .22 bolt action. The receiver is grooved for tip-off mounts. To mount that scope, you are undoubtedly going to need 1" diameter high tip-off rings. None are adjustable for windage. kdub01 TFF Senior Staff Posts: 1917 (1/27/03 1:08:48 pm) Reply Re: Winchester Model 310- what size rings? -------------------------------------------------------------------------------- Millet makes clamp-on rings to fit the grooved receiver, and they have the ability to make windage adjustments. These are available at just about any of the better mail-order places. "Keep Off The Ridgeline" AntiqueDr TFF Senior Staff Posts: 3271 (1/27/03 2:17:17 pm) Reply ezSupporter Re: Winchester Model 310- what size rings? -------------------------------------------------------------------------------- Yep, had forgotten about the Millett Angle-Lok. They do have a degree of windage adjustment. Make sure you get the Angle-Lok, they offer another type of tip-off ring that is not adjustable. Here is a link to their catalog page: www.millettsights.com/catp13.htm -->