Springfield Savage 67 410 Gauge: NEED HELP! - The Firearms Forum

applejack · 01-18-2008, 03:53 PM

I just inherited the savage 67 and i want to take it apart properly and clean it up. One problem is my little brother in his infinite wisdom at the age of five tried taking it apart and after one screw realized his mistake. So now, the firing pin, or what i think is the firing pin is floating around in there, luckily, i still have the screw. I've seen that a couple people have posted the parts diagram of the gun but with my little knowledge i need more help than that. Anybody have a list of instructions on disassembling this puppy, or atleast enough to get that firing pin back in place?

Thanks a lot.

Xracer · 01-19-2008, 07:32 AM

Hi applejack....welcome to TFF.

Well, I'm not familiar with your gun so I can't help you, but keep checking back....one of our "experts" should be along sooner or later to help you out.

Mark · 01-19-2008, 08:58 AM

What's a 5 year old doing with a shotgun?

The 67's are a nightmare to fully disassemble. If it were mine, I would take it to a qualified gunsmith and beg him to clean, fix, and reassemble it.
Good luck on this.
Mark

applejack · 01-19-2008, 09:45 AM

Thanks guys, I"ll keep looking.

gunner651 · 01-22-2009, 04:32 PM

i have a savage 67 in 12 and it took melike an hou to take it apart. try to take off the magazine tube then the screw behind the trigger and it should come apart

01-18-2008, 03:53 PM	#1
applejack Member Join Date: Jan 2008 Posts: 2	Springfield Savage 67 410 Gauge: NEED HELP! I just inherited the savage 67 and i want to take it apart properly and clean it up. One problem is my little brother in his infinite wisdom at the age of five tried taking it apart and after one screw realized his mistake. So now, the firing pin, or what i think is the firing pin is floating around in there, luckily, i still have the screw. I've seen that a couple people have posted the parts diagram of the gun but with my little knowledge i need more help than that. Anybody have a list of instructions on disassembling this puppy, or atleast enough to get that firing pin back in place? Thanks a lot. -->

01-19-2008, 07:32 AM	#2
Xracer TFF Admin Staff Mediator Join Date: Feb 2001 Location: Minn-eeee-sota, ya, sure, you bet! Posts: 9,144	Re: Springfield Savage 67 410 Gauge: NEED HELP! Hi applejack....welcome to TFF. Well, I'm not familiar with your gun so I can't help you, but keep checking back....one of our "experts" should be along sooner or later to help you out.

01-19-2008, 08:58 AM	#3
Mark V.I.P. Member Join Date: Jul 2006 Posts: 314	Re: Springfield Savage 67 410 Gauge: NEED HELP! What's a 5 year old doing with a shotgun? The 67's are a nightmare to fully disassemble. If it were mine, I would take it to a qualified gunsmith and beg him to clean, fix, and reassemble it. Good luck on this. Mark

01-19-2008, 09:45 AM	#4
applejack Member Join Date: Jan 2008 Posts: 2	Re: Springfield Savage 67 410 Gauge: NEED HELP! Thanks guys, I"ll keep looking.

01-22-2009, 04:32 PM	#5
gunner651 Member Join Date: Jan 2009 Posts: 1	Re: Springfield Savage 67 410 Gauge: NEED HELP! i have a savage 67 in 12 and it took melike an hou to take it apart. try to take off the magazine tube then the screw behind the trigger and it should come apart