who's reloading tonight? - The Firearms Forum

cycloneman · 02-20-2009, 06:47 PM

Buzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

Got that damn tumbler going

army mp · 02-20-2009, 06:55 PM

I heard a new one the other day, I ordered some brass the other day, the guy I got it from was telling me that he got his lead level checked, and it was real high, he claims the only exposure to lead is from tumbling brass in his office trailer . has anyone else heard anything like this.

cycloneman · 02-20-2009, 07:04 PM

Quote:

Originally Posted by army mp

I heard a new one the other day, I ordered some brass the other day, the guy I got it from was telling me that he got his lead level checked, and it was real high, he claims the only exposure to lead is from tumbling brass in his office trailer . has anyone else heard anything like this.

No. I wonder if he lives in an old house with old pipes. How would tumbling brass do that? strange.

army mp · 02-20-2009, 07:09 PM

my be a bunch of BS but he said he tumble a lot of brass. anything is possible. I put dryer sheets in with the brass and it really cuts down on the dust from the walnut shells

cycloneman · 02-20-2009, 07:12 PM

Quote:

Originally Posted by army mp

my be a bunch of BS but he said he tumble a lot of brass. anything is possible. I put dryer sheets in with the brass and it really cuts down on the dust from the walnut shells

I never used walnut. But I am trying something different this time. I am using fine corn cob treated. Hoping this will get the primer pocket. The corse corn cob just gets stuck in there and i have to do it by hand afterwords.

army mp · 02-20-2009, 07:24 PM

I have always used the walnut. my brother used the corn and did not like it he did not say why. with the walnut. I stole one of those picks that came with a nut cracker set. to pick the stuff out that gets in the primer pocket. my wife is still looking for it, now she has an empty spot in the holder I would give it back to her but it just works to darn well

gdmoody · 02-20-2009, 07:32 PM

Not reloading tonight - I use an out building and it is just too chilly out there, probably will be tomorrow, though.

MP - I have heard before that some people put a dryer sheet in the tumbler. Silly question - is it actually a tumbler or is it a vibrating "tumbler" that you use??

army mp · 02-20-2009, 07:41 PM

Lyman 1200 I have two of them they are the Vibrating type I have had the one for about ten years but with loading 380, 9mm 38, 357, 45 and then the rifles I could not keep up with the one. its been a good tumbler for the money

stickflinger · 02-20-2009, 08:37 PM

it's cold out in the garage but I loaded 100 rounds for my long range ar tonite. Shooting in the morning at 500....I'm excited

Haligan · 02-20-2009, 08:42 PM

I use corn cob. I used to use coated walnut but the reason I stopped is that it left a red residue on the brass.
Now that by itself is no big deal but I started to notice alot of red residue build up on and inside the rim of my brass.
Again what's the big deal ? I'll tell you. On revolver cartridges their is no big deal, however on any semi auto the extracter has to "bite" the rim to pull it out of the chamber. It is here that I noticed I would have to spend more time with a little toothbrush cleaning the extractor then I would like.
Anyhow since I've stopped using coated walnut shell my cleaning of my firearms has become better.
Sorry to hi-jack the post. No, I'm not doing any reloading tonight, I need to cast more lead bullets, and I'm out of ammo boxes.

cycloneman · 02-20-2009, 09:03 PM

well i'm playing with 223's tonight.

army mp · 02-20-2009, 09:04 PM

thats where the dryer sheets come in, I punch a hole in the center of the sheet and put it under the lid, I know what you are talking about, I was having the same problem, the dryer sheet collects all the dust I load 380 ,9mm and 45ACPand do not have any problems.

RandyP · 02-21-2009, 01:53 AM

Ran a scant 100 rounds of 9mm 115gr pated RN to setup my 4-die set in its own Lee turret. This Classic Turret press is a gem IMHO.

I mix up about a 3/4 to 1/4 mix of walnut-corncob, add a tbl of liquid car polish and let it run in the Lyman 1200 for about an hour (no brass) Then the mixture is good to go for brass tumbling. I also throw a couple cut up USED dryer sheets into the mix to take up the dust and discard the sheets each time.

new308handloader · 02-21-2009, 07:02 AM

Quote:

Originally Posted by cycloneman

No. I wonder if he lives in an old house with old pipes. How would tumbling brass do that? strange.

My lead level is also high.....but I don't see any way tumbling could have anything to do with this....I do just like everybody else....tumble, then lick the dust of each shell, then dry and polish it with my t-shirt.

RandyP · 02-21-2009, 09:30 AM

Regarding the lead exposure, if you shoot at an indoor range that allows lead reloads, their air handling equipement NEEDS to be in tip-top shape or your exposure to inhaled lead vapor will be greater than what you get from just the primers going off.

Haligan · 02-21-2009, 12:09 PM

Quote:

Originally Posted by new308handloader

My lead level is also high.....but I don't see any way tumbling could have anything to do with this....I do just like everybody else....tumble, then lick the dust of each shell, then dry and polish it with my t-shirt.

LOL

dammitman · 02-28-2009, 07:49 PM

i am,,,,,,44 mag

cycloneman · 02-28-2009, 11:17 PM

Quote:

Originally Posted by dammitman

i am,,,,,,44 mag

Yep another saturday night. im doing the same, snl in the backgound

RandyP · 02-28-2009, 11:43 PM

did 200 rounds of 9mm. Red Green Show, Jurassic Park. lol

Smokincook · 03-01-2009, 08:21 AM

38 special - 158 gr SWC, then a few 357 mag 158 gr hollow points, what kind of music does anyone listen while you're reloading??

cycloneman · 03-01-2009, 11:35 AM

Quote:

Originally Posted by Smokincook

38 special - 158 gr SWC, then a few 357 mag 158 gr hollow points, what kind of music does anyone listen while you're reloading??

welcome smokincook:

na dont listen to music just the tv and ususally it a comedy

bluesea112 · 03-08-2009, 12:43 PM

I would be reloading if I could find the components in stock. Nothing but empty shelves in the store and "out of stock" notices online.

new308handloader · 03-08-2009, 01:16 PM

Quote:

Originally Posted by Smokincook

38 special - 158 gr SWC, then a few 357 mag 158 gr hollow points, what kind of music does anyone listen while you're reloading??

Either some nice Appalachian tap dancing by Jesco "The Dancing Outlaw" \
or Pink Floyd....whichever mode I'm in.

RandyP · 03-08-2009, 07:11 PM

Tonite was 150 rounds of .380 while waiting for the chicken to bake -lol

gdmoody · 03-08-2009, 09:35 PM

I was out there this afternoon, loaded some 9mm and .45 ACP on the Dillon and some 5.7X28 on the Lee single stage. I'm going to the range in the morning so I will probably do some more tomorrow evening (when I get through with the honey-do's).

I ordered about $200 worth of bullets from Berry's a couple of days ago so I will be loading a bunch in the coming weeks.

02-20-2009, 06:47 PM	#1
cycloneman Advanced Senior Member Join Date: Dec 2008 Location: Louisiana Posts: 7,400	who's reloading tonight? Buzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz Got that damn tumbler going __________________ Who are you going to serve today? -->

02-20-2009, 06:55 PM	#2
army mp V.I.P. Member Join Date: Jan 2009 Location: western Pa, Posts: 479	Re: who's reloading tonight? I heard a new one the other day, I ordered some brass the other day, the guy I got it from was telling me that he got his lead level checked, and it was real high, he claims the only exposure to lead is from tumbling brass in his office trailer . has anyone else heard anything like this.

02-20-2009, 07:09 PM	#4
army mp V.I.P. Member Join Date: Jan 2009 Location: western Pa, Posts: 479	Re: who's reloading tonight? my be a bunch of BS but he said he tumble a lot of brass. anything is possible. I put dryer sheets in with the brass and it really cuts down on the dust from the walnut shells

02-20-2009, 07:24 PM	#6
army mp V.I.P. Member Join Date: Jan 2009 Location: western Pa, Posts: 479	Re: who's reloading tonight? I have always used the walnut. my brother used the corn and did not like it he did not say why. with the walnut. I stole one of those picks that came with a nut cracker set. to pick the stuff out that gets in the primer pocket. my wife is still looking for it, now she has an empty spot in the holder I would give it back to her but it just works to darn well

02-20-2009, 07:32 PM	#7
gdmoody Advanced Senior Member Join Date: Sep 2007 Location: Northeast Georgia Contributor Posts: 6,310	Re: who's reloading tonight? Not reloading tonight - I use an out building and it is just too chilly out there, probably will be tomorrow, though. MP - I have heard before that some people put a dryer sheet in the tumbler. Silly question - is it actually a tumbler or is it a vibrating "tumbler" that you use?? __________________ NRA Endowment Member GeorgiaCarry.Org Member Retired US Army Postal Worker Personally, I carry a gun because I'm too young to die and too old to take an ass whoopin'.....author unknown (but obviously brilliant)

02-20-2009, 07:41 PM	#8
army mp V.I.P. Member Join Date: Jan 2009 Location: western Pa, Posts: 479	Re: who's reloading tonight? Lyman 1200 I have two of them they are the Vibrating type I have had the one for about ten years but with loading 380, 9mm 38, 357, 45 and then the rifles I could not keep up with the one. its been a good tumbler for the money

02-20-2009, 08:37 PM	#9
stickflinger Member Join Date: Feb 2009 Posts: 4	Re: who's reloading tonight? it's cold out in the garage but I loaded 100 rounds for my long range ar tonite. Shooting in the morning at 500....I'm excited

02-20-2009, 08:42 PM	#10
Haligan Advanced Senior Member Join Date: Feb 2008 Location: FEMA Region II Posts: 1,900	Re: who's reloading tonight? I use corn cob. I used to use coated walnut but the reason I stopped is that it left a red residue on the brass. Now that by itself is no big deal but I started to notice alot of red residue build up on and inside the rim of my brass. Again what's the big deal ? I'll tell you. On revolver cartridges their is no big deal, however on any semi auto the extracter has to "bite" the rim to pull it out of the chamber. It is here that I noticed I would have to spend more time with a little toothbrush cleaning the extractor then I would like. Anyhow since I've stopped using coated walnut shell my cleaning of my firearms has become better. Sorry to hi-jack the post. No, I'm not doing any reloading tonight, I need to cast more lead bullets, and I'm out of ammo boxes. __________________ "He who knows nothing is closer to the truth than he whose mind is filled with falshoods and errors." - Thomas Jefferson

02-20-2009, 09:03 PM	#11
cycloneman Advanced Senior Member Join Date: Dec 2008 Location: Louisiana Posts: 7,400	Re: who's reloading tonight? well i'm playing with 223's tonight. __________________ Who are you going to serve today?

02-20-2009, 09:04 PM	#12
army mp V.I.P. Member Join Date: Jan 2009 Location: western Pa, Posts: 479	Re: who's reloading tonight? thats where the dryer sheets come in, I punch a hole in the center of the sheet and put it under the lid, I know what you are talking about, I was having the same problem, the dryer sheet collects all the dust I load 380 ,9mm and 45ACPand do not have any problems.

02-21-2009, 01:53 AM	#13
RandyP V.I.P. Member Join Date: Jan 2009 Posts: 430	Re: who's reloading tonight? Ran a scant 100 rounds of 9mm 115gr pated RN to setup my 4-die set in its own Lee turret. This Classic Turret press is a gem IMHO. I mix up about a 3/4 to 1/4 mix of walnut-corncob, add a tbl of liquid car polish and let it run in the Lyman 1200 for about an hour (no brass) Then the mixture is good to go for brass tumbling. I also throw a couple cut up USED dryer sheets into the mix to take up the dust and discard the sheets each time.

02-21-2009, 09:30 AM	#15
RandyP V.I.P. Member Join Date: Jan 2009 Posts: 430	Re: who's reloading tonight? Regarding the lead exposure, if you shoot at an indoor range that allows lead reloads, their air handling equipement NEEDS to be in tip-top shape or your exposure to inhaled lead vapor will be greater than what you get from just the primers going off.

02-28-2009, 07:49 PM	#17
dammitman V.I.P. Member Join Date: Feb 2009 Posts: 241	Re: who's reloading tonight? i am,,,,,,44 mag

02-28-2009, 11:43 PM	#19
RandyP V.I.P. Member Join Date: Jan 2009 Posts: 430	Re: who's reloading tonight? did 200 rounds of 9mm. Red Green Show, Jurassic Park. lol

03-01-2009, 08:21 AM	#20
Smokincook Member Join Date: Feb 2009 Location: NE Kansas Posts: 5	Re: who's reloading tonight? 38 special - 158 gr SWC, then a few 357 mag 158 gr hollow points, what kind of music does anyone listen while you're reloading??

03-08-2009, 12:43 PM	#22
bluesea112 Advanced Senior Member Join Date: Nov 2005 Location: West, TX Contributor Posts: 1,257	Re: who's reloading tonight? I would be reloading if I could find the components in stock. Nothing but empty shelves in the store and "out of stock" notices online.

03-08-2009, 07:11 PM	#24
RandyP V.I.P. Member Join Date: Jan 2009 Posts: 430	Re: who's reloading tonight? Tonite was 150 rounds of .380 while waiting for the chicken to bake -lol

03-08-2009, 09:35 PM	#25
gdmoody Advanced Senior Member Join Date: Sep 2007 Location: Northeast Georgia Contributor Posts: 6,310	Re: who's reloading tonight? I was out there this afternoon, loaded some 9mm and .45 ACP on the Dillon and some 5.7X28 on the Lee single stage. I'm going to the range in the morning so I will probably do some more tomorrow evening (when I get through with the honey-do's). I ordered about $200 worth of bullets from Berry's a couple of days ago so I will be loading a bunch in the coming weeks. __________________ NRA Endowment Member GeorgiaCarry.Org Member Retired US Army Postal Worker Personally, I carry a gun because I'm too young to die and too old to take an ass whoopin'.....author unknown (but obviously brilliant) Last edited by gdmoody; 03-08-2009 at 09:38 PM..