|
|
|
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
02-23-2003, 11:52 PM
|
#1 |
|
Advanced Senior Member
Join Date: Jan 2003
Location: Deep Piney Woods of East Texas
Posts: 5,116
|
Mossberg 9200 Forend Problem
gpostal
*TFF Senior Staff* Posts: 2236 (6/20/02 8:57:17 am) Reply | Edit | Del All 12 mossberg / free floating barrel -------------------------------------------------------------------------------- ok , im picking up a mossberg .12gage auto loader from a friend of mine , in hopes doc or someone can tell me this fix ,every since he bought it ,the barrel moves back and forth {loose about 1/4 inch, it has never been disassembled ,and I thought I would give it a shot on this being a common problem before I actually take the gun home and look at it AntiqueDr *TFF Senior Staff* Posts: 2762 (6/20/02 9:52:40 am) Reply | Edit | Del ezSupporter Re: 12 mossberg / free floating barrel -------------------------------------------------------------------------------- Sounds like the forend assembly is not on correctly. I'd have to see it... We Buy Guns! 1 - 100, Antique or Modern! www.apaxenterprises.com Master Dealer for Kimber, Wilson Combat and Dan Wesson gpostal *TFF Senior Staff* Posts: 2259 (6/22/02 4:52:02 pm) Reply | Edit | Del Re: 12 mossberg / free floating barrel -------------------------------------------------------------------------------- doc I have the gun in my possession now ,it is a mossberg 5500MKII ,I took off the forearm and it appears it is missing a type of ring that should hold the barrel in place on the magazine , the ring that is on it looks like a plastic washer ,held in place by a poorly cut wide ring ,{that resembles a piece of conduit},do you have a schematic? AntiqueDr *TFF Senior Staff* Posts: 2778 (6/22/02 6:15:34 pm) Reply | Edit | Del ezSupporter Re: 12 mossberg / free floating barrel -------------------------------------------------------------------------------- I do have a schematic and parts list for that model, but I wont be back in the shop until Tuesday. There is an outer and inner piston ring, a seal ring, and an O-ring that fit on the magazine tube. We Buy Guns! 1 - 100, Antique or Modern! www.apaxenterprises.com Master Dealer for Kimber, Wilson Combat and Dan Wesson gpostal *TFF Senior Staff* Posts: 2260 (6/22/02 6:22:41 pm) Reply | Edit | Del Re: 12 mossberg / free floating barrel -------------------------------------------------------------------------------- doc all those are intact ,before the barrel ,the only thing holding the barrel on is a hard plastic ring ,that moves freely the piece i suspected was conduit "is" conduit ,i found the u.l. mark on it ,is there some sort of bushhing that should hold the barrel on? on the cylinder it has a drawing of the wieghts and o rings that part is ok , im stuck between the barrel was once changed and not installed back correctly due to missing a bushing or the end of the barrel that goes behind the bolt is missing a piece that should catch gpostal *TFF Senior Staff* Posts: 2263 (6/23/02 10:19:47 am) Reply | Edit | Del Re: 12 mossberg / free floating barrel -------------------------------------------------------------------------------- the conduit was placed there as a ring that goes betwen the forearm and the barrel "on the magizine" , but it is still about 1/4 shy of being a good shim its a good looking gun on the surface ,until you move the barrel ,the reciver is black and the barrel is blue ,the barrel has a vent-rib ,the fine lines on top of both do not match ,the barrel has more dpi ,the barrel does say mossberg 5500MKII hope i made it clear im still asleep |
|
|
 |
| Thread Tools | |
|
|
