Lee press/RCBS dies are they compatabe

tccox
Member
Posts: 6
(6/14/01 2:11:51 pm)
Reply | Edit | Del All Lee press/RCBS dies are they compatabe
--------------------------------------------------------------------------------
Will RCBS dies work on the Lee single action press? I don't have access to any RCBS dies but there is a set on an auction that I am interested in. Thanks, Tom

Bompa
Member
Posts: 21
(6/14/01 5:57:16 pm)
Reply | Edit | Del Re: Lee press/RCBS dies are they compatabe
--------------------------------------------------------------------------------
As long as they are 7/8-14 thread they will work together..
Most all single stage and turret presses are bored for the
same size thread,it is an industry standard..
When you think about it, it is almost amazing.. Generally part
interchangeability between manufactures is not the case.
All to the reloaders benefit..
Hope this helps..

Brass Rat
Member
Posts: 1
(8/1/01 10:00:09 pm)
Reply | Edit | Del Re: Lee press/RCBS dies are they compatabe
--------------------------------------------------------------------------------
Will work with no problem. Don't forget to get the appropriate Lee shellholder though.
Guns cause crime like flies cause garbage. MOLON LABE

Tac401
Administrator
Posts: 1806
(8/1/01 10:15:09 pm)
Reply | Edit | Del
ezSupporter
Re: Lee press/RCBS dies are they compatabe
--------------------------------------------------------------------------------
Welcome Aboard Brass Rat!
The Firearms Forum Vietnam Memories Bulletin Board Contact Administrator

kdubaz
Moderator
Posts: 434
(8/1/01 10:37:16 pm)
Reply | Edit | Del Re: Lee press/RCBS dies are they compatabe
--------------------------------------------------------------------------------
Howdy, Brass Rat -

Welcome to the board. Pull up a stool to the reloading bench and make yourself comfortable. Don't be shy about jumping in on any topic - we need all the help we can get!
Keep below the ridgeline!