A 1911 ejection port question... - The Firearms Forum

glocknut · 06-24-2009, 01:00 AM

The most recent 1911 i bought has an ejection port that is different that the others. All the others have a kind of cutout that this one does not. What is that cutout for?

mike
gn

Here's the one without the cutout...

glocknut · 06-24-2009, 01:03 AM

Here's the other 3 that DO have the strange cutout/beveled...whatever its called thing on the backside of the ejection port.

What's that for?

These are Lightweight Commander, Dan Wesson, and Kimber. And as usual...sooo sooo sorry about the pic quality or lack thereof.

jacksonco · 06-24-2009, 01:17 AM

I think that the cutout is to prevent dings in the ejected brass. Without the cutout 1911 models can ding the brass on the frame as it is ejected.

TranterUK · 06-24-2009, 02:47 AM

Quote:

Originally Posted by jacksonco

I think that the cutout is to prevent dings in the ejected brass. Without the cutout 1911 models can ding the brass on the frame as it is ejected.

This is correct. Its to do with reloading, and avoids dings in the cases.

Looks cool too.

oscarmayer · 06-24-2009, 04:26 AM

correct, a "flared" ejection port is to save the brass from being dinged up.

Alpo · 06-24-2009, 07:23 AM

The term I know is "relieved", not "flared", but yeah, what they said.

carver · 06-24-2009, 07:29 AM

I believe you have been given the correct advice. My pistol does not have the same reliefe as yours do, mine was after market, and is just an elongated ejection port. They both do the same thing. The brass clears better upon extraction, and because it isn't hitting anything, no dings, no stove pipes!

techoca · 06-24-2009, 07:45 AM

Not to mention that along with an extended extractor, it helps to keep you from being hit in the head with the brass.

Shooter45 · 06-24-2009, 07:50 AM

Alpo, in the top photo the ejection port is lowered. In the second photo, the ejection port is lowered and flaired.

Techoca, I think you mean extended ejector.

The purpose of this modification is to get the fired case out of the pistol earlier in the recoil stroke, thus helping to prevent "stovepipe" jams. In actual practice, I’ve never had a problem with the standard ejector in full-size 1911s. The disadvantage of an extended ejector is that it may not always allow the ejection of loaded rounds, and you’d have to let them extract carefully down into the magazine well. If you must have an extended ejector, consider re-shaping the ejection port to allow clearance of ejected loaded rounds. On the Commander-length and Officer’s-length pistols, the extended ejector is a good idea, since the recoil stroke of the slide is shorter. Most of these pistols come standard with an extended ejector anyway, so it’s a moot point. Extended ejectors do hustle the fired case out of the pistol muy pronto, and every bit of hustle helps with the abbreviated pistols. It probably can’t hurt the full-size pistols except for the loaded-round problem, but it’s not really necessary, either.

Just FYI.

techoca · 06-24-2009, 09:41 AM

Shooter45,
indeed, I mis typed!

Alpo · 06-24-2009, 10:14 AM

Learn somethin' new every day. So, that's why the Commander has a different shaped ejector than a Government Model? I didn't know why, I just knew that it did, and my Springfield and AMT full-size frames have the Commander-type ejector.

I wasn't sayin' oscar was wrong, just that in my neck of the woods, that's called "relieved".

johnlives4christ · 06-24-2009, 06:00 PM

yep that little cut is called flared or relieved, it is there to help with ejection more than with brass dings i think, the brass being in better shape is just an added bonus.

i think that with an extened ejector, the slide doesnt need to be flared because since the casing is ejected sooner, when the slide starts its foreward movement the casing is already out. but with a regular ejector, the slide sometimes will bump the empty casing out of the way since it ejects at the end of the recoil cycle instead of in the middle as with an extended ejector. course i might be misinformed, wouldnt be the first time.

i dont like with extended ejectors that you cant cycle a live round out a lot of times, what you can do to relieve that is bevel the inside of the ejection port towards the front of the port, just like the lower part is. You can also file the ejector face about 1/16 shorter and it will help, but not so short that it isn't extended quite a bit though.

06-24-2009, 01:00 AM	#1
glocknut Advanced Senior Member Join Date: Dec 2003 Location: THE FORUM MASCOTT... Posts: 12,482	A 1911 ejection port question... The most recent 1911 i bought has an ejection port that is different that the others. All the others have a kind of cutout that this one does not. What is that cutout for? mike gn Here's the one without the cutout... Attached Images __________________ Where O where are you tonight? Why have you gone and left me alone? I searched to world over and a thought i found true love... You met another and PTThhh you were gone.... -->

06-24-2009, 01:03 AM	#2
glocknut Advanced Senior Member Join Date: Dec 2003 Location: THE FORUM MASCOTT... Posts: 12,482	Re: A 1911 ejection port question... Here's the other 3 that DO have the strange cutout/beveled...whatever its called thing on the backside of the ejection port. What's that for? These are Lightweight Commander, Dan Wesson, and Kimber. And as usual...sooo sooo sorry about the pic quality or lack thereof. Attached Images __________________ Where O where are you tonight? Why have you gone and left me alone? I searched to world over and a thought i found true love... You met another and PTThhh you were gone....

06-24-2009, 01:17 AM	#3
jacksonco Advanced Senior Member Join Date: Jul 2007 Location: Jackson County West Virginia Posts: 2,237	Re: A 1911 ejection port question... I think that the cutout is to prevent dings in the ejected brass. Without the cutout 1911 models can ding the brass on the frame as it is ejected.

06-24-2009, 04:26 AM	#5
oscarmayer Advanced Senior Member Join Date: Jun 2008 Contributor Posts: 2,387	Re: A 1911 ejection port question... correct, a "flared" ejection port is to save the brass from being dinged up.

06-24-2009, 07:23 AM	#6
Alpo Advanced Senior Member Join Date: Feb 2007 Location: NW Florida Posts: 8,649	Re: A 1911 ejection port question... The term I know is "relieved", not "flared", but yeah, what they said. __________________ Meddle not in the affairs of dragons, for thou art crunchy, and taste good with catsup - George of Lod, Year of Our Lord 297 I always take precautions. Beware the Evil Bullet Fairies.

06-24-2009, 07:29 AM	#7
carver TFF Moderator/Host Join Date: Jul 2008 Location: DAV, Deep in the Pineywoods of East Texas, just west of Shreveport, LA Contributor Posts: 11,221	Re: A 1911 ejection port question... I believe you have been given the correct advice. My pistol does not have the same reliefe as yours do, mine was after market, and is just an elongated ejection port. They both do the same thing. The brass clears better upon extraction, and because it isn't hitting anything, no dings, no stove pipes! __________________ Y'all be safe now, ya hear! Lamentations Chapter 5: 1. Remember, O LORD, what is come upon us: consider, and behold our reproach. 2. Our inheritance is turned to strangers, our houses to aliens. 3. We are orphans and fatherless, our mothers [are] as widows. 5. Our necks [are] under persecution: we labour, [and] have no rest. 16. The crown is fallen [from] our head: woe unto us, that we have sinned! 21. Turn thou us unto thee, O LORD, and we shall be turned; renew our days as of old.

06-24-2009, 07:45 AM	#8
techoca V.I.P. Member Join Date: Nov 2008 Posts: 329	Re: A 1911 ejection port question... Not to mention that along with an extended extractor, it helps to keep you from being hit in the head with the brass.

06-24-2009, 07:50 AM	#9
Shooter45 Administrator Join Date: Feb 2001 Contributor Posts: 8,747	Re: A 1911 ejection port question... Alpo, in the top photo the ejection port is lowered. In the second photo, the ejection port is lowered and flaired. Techoca, I think you mean extended ejector. The purpose of this modification is to get the fired case out of the pistol earlier in the recoil stroke, thus helping to prevent "stovepipe" jams. In actual practice, I’ve never had a problem with the standard ejector in full-size 1911s. The disadvantage of an extended ejector is that it may not always allow the ejection of loaded rounds, and you’d have to let them extract carefully down into the magazine well. If you must have an extended ejector, consider re-shaping the ejection port to allow clearance of ejected loaded rounds. On the Commander-length and Officer’s-length pistols, the extended ejector is a good idea, since the recoil stroke of the slide is shorter. Most of these pistols come standard with an extended ejector anyway, so it’s a moot point. Extended ejectors do hustle the fired case out of the pistol muy pronto, and every bit of hustle helps with the abbreviated pistols. It probably can’t hurt the full-size pistols except for the loaded-round problem, but it’s not really necessary, either. Just FYI.

06-24-2009, 09:41 AM	#10
techoca V.I.P. Member Join Date: Nov 2008 Posts: 329	Re: A 1911 ejection port question... Shooter45, indeed, I mis typed!

06-24-2009, 10:14 AM	#11
Alpo Advanced Senior Member Join Date: Feb 2007 Location: NW Florida Posts: 8,649	Re: A 1911 ejection port question... Learn somethin' new every day. So, that's why the Commander has a different shaped ejector than a Government Model? I didn't know why, I just knew that it did, and my Springfield and AMT full-size frames have the Commander-type ejector. I wasn't sayin' oscar was wrong, just that in my neck of the woods, that's called "relieved". __________________ Meddle not in the affairs of dragons, for thou art crunchy, and taste good with catsup - George of Lod, Year of Our Lord 297 I always take precautions. Beware the Evil Bullet Fairies.

06-24-2009, 06:00 PM	#12
johnlives4christ Former Guest Join Date: Apr 2008 Location: Kentucky Posts: 3,828	Re: A 1911 ejection port question... yep that little cut is called flared or relieved, it is there to help with ejection more than with brass dings i think, the brass being in better shape is just an added bonus. i think that with an extened ejector, the slide doesnt need to be flared because since the casing is ejected sooner, when the slide starts its foreward movement the casing is already out. but with a regular ejector, the slide sometimes will bump the empty casing out of the way since it ejects at the end of the recoil cycle instead of in the middle as with an extended ejector. course i might be misinformed, wouldnt be the first time. i dont like with extended ejectors that you cant cycle a live round out a lot of times, what you can do to relieve that is bevel the inside of the ejection port towards the front of the port, just like the lower part is. You can also file the ejector face about 1/16 shorter and it will help, but not so short that it isn't extended quite a bit though.