The Firearms Forum - Gun Community  
TheFirearmsForum.com
FOUNDED: February 9, 2001
If you prefer to make a donation by check,
send an email to Support for the mailing address.

Go Back   The Firearms Forum - Gun Community > Firearm-related Activities > The Ammo & Reloading Forum

Notices


Reply
 
Thread Tools
Old 07-26-2009, 06:08 PM   #1
Dewie
Member
 
Join Date: Jul 2009
Posts: 3
Default 7mm load data

Just wondering if anyone would like to share any load data. I have a buddys 7mm and hes got 139 gr hornady interbond bullets. just woundering were to start with grains of powder. Thanks alot

-->
Dewie is offline   Reply With Quote
Old 07-26-2009, 08:16 PM   #2
Alpo
Advanced Senior Member
 
Alpo's Avatar
 
Join Date: Feb 2007
Location: NW Florida
Posts: 8,662
Default Re: 7mm load data

Something that would help is, "What kind of 7mm do you have?" The three most common are 7mm Remington Magnum, 7x57mm Mauser and 7mm/08, but there are a whole bunch of them out there.
__________________
Meddle not in the affairs of dragons, for thou art crunchy, and taste good with catsup - George of Lod, Year of Our Lord 297

I always take precautions.

Beware the Evil Bullet Fairies.

Alpo is offline   Reply With Quote
Old 07-27-2009, 06:34 PM   #3
Dewie
Member
 
Join Date: Jul 2009
Posts: 3
Default Re: 7mm load data

sorry its 7mm rem mag.
Dewie is offline   Reply With Quote
Old 07-27-2009, 08:21 PM   #4
baldhunter
Member
 
Join Date: Jul 2009
Location: Corpus Christi,Texas
Posts: 3
Default Re: 7mm load data

I've got two loads I've for this bullet in my 7mag.Both are very accurate in my rifle.Just remember,never start with a load that is published,always start lower and work up and check for pressure signs as you go.My old tried and true load for many years is:65.3grs of IMR-4350,CCI Magnum 250 primer.A new load I just worked up and it is as good or maybe even better is:69.5grs Reloader-22,Winchester Large Rifle Magnum primer.Both of these loads chronograph a little over 3200fps out of my rifle.
baldhunter is offline   Reply With Quote
Old 07-27-2009, 11:12 PM   #5
Dewie
Member
 
Join Date: Jul 2009
Posts: 3
Default Re: 7mm load data

ok thanks. new a reloading and the max load i got with imr 4350 powder is 62.8 gr. now i know most of you guys are pros at this but i just want the best group and speed safely. No disrespect to anyone. Just a new ignorant reloader.
Dewie is offline   Reply With Quote
Old 07-28-2009, 05:44 AM   #6
baldhunter
Member
 
Join Date: Jul 2009
Location: Corpus Christi,Texas
Posts: 3
Default Re: 7mm load data

The 7mag has been loaded down in recent years to make the newer calibers look so much better.It seems that is always the trend.When something new comes out it's loaded up nearer to max until something else comes along.When the 7mmSTW came out,it was compared to the 7mag,then the 7mmWSM,after that,most of the manuals I've seen have kept it fairly mild.Heck if I wanted my 7mag to shoot like a 280,I would have bought a 280.Here some more loads to check on this site http://www.reloadersnest.com/frontpage.asp?CaliberID=48 once again always work a load up.Never start with a max load.
baldhunter is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:08 PM.

STILL SEARCHING FOR SOMETHING? TRY THE TFF "GOOGLE" SEARCH ENGINE BELOW!
Google

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
Copyright ©2002 - 2013, TheFirearmsForum.Com