|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
*TFF Moderator/Host*
Join Date: Apr 2009
Location: Imperial, MO
Posts: 3,618
|
Got a question on a star 45. Is it correct that the hammer will drop when the safety is dropped to fire while the trigger is pulled? I don't see anything to prevent this but I want to make sure.
__________________
Only cowards shoot with their eyes closed.... helixgunsmith.com
-->
|
|
|
|
|
|
#2 |
|
Advanced Senior Member
Join Date: Apr 2006
Contributor
Posts: 1,467
|
That is normal. The safety simply lifts the hammer off the sear, and locks it.
Assuming you are referring to the 1911-looking Stars? |
|
|
|
|
|
#3 |
|
*TFF Moderator/Host*
Join Date: Apr 2009
Location: Imperial, MO
Posts: 3,618
|
Yep, looks like a colt pony on the innards with a 1911 barrel and slide
. thanks Bill.
__________________
Only cowards shoot with their eyes closed.... helixgunsmith.com |
|
|
|
|
|
#4 |
|
Advanced Senior Member
Join Date: Dec 2009
Posts: 6,408
|
Isn't that true of the M1911 also?
Jim |
|
|
|
|
|
#5 |
|
*TFF Moderator/Host*
Join Date: Apr 2009
Location: Imperial, MO
Posts: 3,618
|
no, can't pull the trigger with the safety engaged on a 1911. The star will allow the trigger to be pulled with the safety on. A 1911 series will have the sear blocked which also blocks the trigger from going to the rear.
__________________
Only cowards shoot with their eyes closed.... helixgunsmith.com |
|
|
|
|
|
#6 |
|
Advanced Senior Member
Join Date: Dec 2009
Posts: 6,408
|
True, but on a 1911 if you cock the gun and put the safety on, then put pressure on the trigger and release the safety, the hammer will fall. The mechanism is different, but the result is the same.
Jim |
|
|
|
|
|
#7 |
|
*TFF Moderator/Host*
Join Date: Apr 2009
Location: Imperial, MO
Posts: 3,618
|
Ah, I gotcha Jim, good point
![]()
__________________
Only cowards shoot with their eyes closed.... helixgunsmith.com |
|
|
|
![]() |
| Thread Tools | |
|
|