The Firearms Forum - Gun Community  
TheFirearmsForum.com
FOUNDED: February 9, 2001
If you prefer to make a donation by check,
send an email to Support for the mailing address.

Go Back   The Firearms Forum - Gun Community > Technical Information > The Ask the Pros & What's It Worth? Forum

Notices


Reply
 
Thread Tools
Old 05-13-2012, 08:09 PM   #26
Jim K
Advanced Senior Member
 
Join Date: Dec 2009
Posts: 6,408
Default Re: MAB Brevete Model D (made in france)

I think your questions have been pretty well answered. The chrome/nickel finish is not original. The Germans took over many of those pistols and the eagle/swastika is the German acceptance stamp. The number is that of the WaA (Waffenamt) inspector whose team accepted the pistol for German service.

The gun is a shooter, with little collector interest. The ammunition might be corrosive in which case it will rust the barrel unless the barrel is cleaned right after firing.

Up until the mid-1930's almost all ammunition, including .32 ACP, was corrosive primed; after that, SOME commercial ammo was non-corrosive but almost all military ammo still used corrosive primers. Unless a box specifically says "non-corrosive", "sinoxid" or "nicorro" any ammuntion made prior to the 1950s should be considered possibly corrosive. (Even some late ammo, like 5.45x39 Russian, and some .303 British may be corrosive.)

Jim
Jim K is offline   Reply With Quote
Old 05-14-2012, 04:52 PM   #27
army vet
Member
 
Join Date: Apr 2012
Posts: 6
Default Re: MAB Brevete Model D (made in france)

Thanks for your help, much appreciated.
army vet is offline   Reply With Quote
Old 05-20-2012, 07:33 PM   #28
fleetwood1976
Advanced Senior Member
 
fleetwood1976's Avatar
 
Join Date: Feb 2009
Location: Southern Indiana
Contributor
Posts: 1,339
Default Re: MAB Brevete Model D (made in france)

thats the kind of holster my nazi proof marked one came in. it might be one that the nazi's captured and reissued. your pic is too small for me to see the mark.
fleetwood1976 is offline   Reply With Quote
Old 05-23-2012, 11:27 AM   #29
army vet
Member
 
Join Date: Apr 2012
Posts: 6
Default Re: MAB Brevete Model D (made in france)

The holster has a very clear stamping of an Eagle holding a Swastica in it's talons. I was wondering about the color, most I have seen were black. Does the Brown have any significance?
army vet is offline   Reply With Quote
Old 06-17-2012, 06:01 PM   #30
ShawnDow
V.I.P. Member
 
ShawnDow's Avatar
 
Join Date: Jun 2012
Location: Tawas City, Michigan
Posts: 398
Default Re: MAB Brevete Model D (made in france)

I think the nickle plating looks good... if your going to use it and not trade it in for "value" do what you like it it... i have an early sn unit 24XXX type 1 and I'm going to overhaul the thing so my daughters can learn to shoot a pistol. and the nickel plating looks good... at least the slide.. ill have to photoshop it to see what i like best.
ShawnDow is offline   Reply With Quote
Old 06-17-2012, 06:30 PM   #31
Lanrezac
Senior Member
 
Join Date: Sep 2011
Location: Milwaukee, WI
Posts: 699
Default Re: MAB Brevete Model D (made in france)

ShawnDow, I think nickel plate would make the sights harder to see, unless your MAB D is one of the ones with the big adjustable sights. Also, for a new shooter, even the recoil of of a 32 automatic is startling. And 32 Auto costs about $15 a box even at gun shows, compared to what? $3.00? for 22LR. All just my $.02, of course. Have fun!
Lanrezac is offline   Reply With Quote
Old 07-16-2012, 03:59 PM   #32
rosco818
Member
 
Join Date: Jul 2012
Posts: 2
Default Re: MAB Brevete Model D (made in france)

I found a exact gun in my attic a couple of week ago. I purchased this house in 2003 and the house was built in 1978. so I believe the gun has been sitting there at least for a 9+ years. I would like to know if I can register this gun under my name if it has a clear record and nobody register it before. Is there any regulation or law applialble to my case? thanks
rosco818 is offline   Reply With Quote
Old 07-16-2012, 04:56 PM   #33
RJay
Advanced Senior Member
 
Join Date: Feb 2004
Location: Arizona
Posts: 3,504
Default Re: MAB Brevete Model D (made in france)

Where do you live, most states do not require registering firearms.
__________________
RonJames

Last edited by RJay; 07-16-2012 at 06:54 PM..
RJay is offline   Reply With Quote
Old 07-17-2012, 11:16 AM   #34
rosco818
Member
 
Join Date: Jul 2012
Posts: 2
Default Re: MAB Brevete Model D (made in france)

I live in Michigan and we do need to register firearms.
rosco818 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:48 AM.

STILL SEARCHING FOR SOMETHING? TRY THE TFF "GOOGLE" SEARCH ENGINE BELOW!
Google

Copyright ©2002 - 2013, TheFirearmsForum.Com