Help..Jukar,Spain flintlock pistol, parts - The Firearms Forum

Kid*Rocks*Queen · 01-24-2011, 10:29 PM

can anyone tell me were I can buy parts for a Jukar 4 caliber flintlock pistol? I need a trigger spring, and I've tried for way to long. help..

jack404 · 01-25-2011, 12:59 AM

G'day and welcome to the forum

may i suggest a reputable smith and take the plans with you and get them to craft the parts you need ?? or buy another ( if thats possible) for spares , But the hammers on those where often broken and the frizzen swivel was another thing that cracked and lost the frizzen , a harvet would fit the frizzen if thats what you need and way more common but still not that much

if you could you state what parts you wish i can ask the dealer network around the world and let you know whats available

cheers

jjmitchell60 · 01-25-2011, 02:15 PM

Contact these people, best in the country for BP parts.
Http://www.dixiegunworks.com
Turner Kirkland started Dixie Gun Works in the 50s or 60s and call them as to what parts you need IF you do not find them in their opnline catalog. Their shop personal are great and can tell you where to get the parts or they can make them in house. IF close to their shop, stop in because they have a museum of old cars, trucks, motorcycle, buggies, and guns that you will see in such a small town. Also order a hard copy of their catalog. It is $10 I think BUT the last 100 pages is a wealth of information on black powder guns including cartridge BP guns and cannons.

Hope this helps. Also a lot of CVA parts interchange with the jukars, I have a jukar 45 flint lock KY pistol.

rammed · 01-25-2011, 05:27 PM

Could you post a pic of the broken part(s).

Blkdthrlm · 04-24-2011, 07:04 PM

Hello,
I have an incomplete Jukar 45 BP pistol that is only minus the hammer assembly,complete otherwise.Take 45.00 for the whole thing.

Hawg · 04-24-2011, 07:09 PM

Trigger spring? There is no trigger spring.

Blkdthrlm · 04-26-2011, 11:13 PM

Your absolutely right, there are two springs that are indirect to the trigger.But without either of these the trigger will not operate. So which spring does he need? One is for hammer cam the other is for the trigger lever.

01-24-2011, 10:29 PM	#1
KidRocksQueen Member Join Date: Jan 2011 Location: MICHIGAN Posts: 1	Help..Jukar,Spain flintlock pistol, parts can anyone tell me were I can buy parts for a Jukar 4 caliber flintlock pistol? I need a trigger spring, and I've tried for way to long. help.. -->

01-25-2011, 12:59 AM	#2
jack404 Former Guest Join Date: Jan 2010 Location: Australia Contributor Posts: 17,622	Re: Help..Jukar,Spain flintlock pistol, parts G'day and welcome to the forum may i suggest a reputable smith and take the plans with you and get them to craft the parts you need ?? or buy another ( if thats possible) for spares , But the hammers on those where often broken and the frizzen swivel was another thing that cracked and lost the frizzen , a harvet would fit the frizzen if thats what you need and way more common but still not that much if you could you state what parts you wish i can ask the dealer network around the world and let you know whats available cheers

01-25-2011, 02:15 PM	#3
jjmitchell60 Advanced Senior Member Join Date: May 2004 Location: Raised in Buzzard Roost near Frog Town in hillls of Kentucky Contributor Posts: 1,474	Re: Help..Jukar,Spain flintlock pistol, parts Contact these people, best in the country for BP parts. Http://www.dixiegunworks.com Turner Kirkland started Dixie Gun Works in the 50s or 60s and call them as to what parts you need IF you do not find them in their opnline catalog. Their shop personal are great and can tell you where to get the parts or they can make them in house. IF close to their shop, stop in because they have a museum of old cars, trucks, motorcycle, buggies, and guns that you will see in such a small town. Also order a hard copy of their catalog. It is $10 I think BUT the last 100 pages is a wealth of information on black powder guns including cartridge BP guns and cannons. Hope this helps. Also a lot of CVA parts interchange with the jukars, I have a jukar 45 flint lock KY pistol. __________________ Oath Keepers NOT ON OUR WATCH www.oathkeepers.org 2nd Amendment to the US Constitution: A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote." -- Benjamin Franklin When injustice becomes law, resistance becomes Duty... Thomas Jefferson Last edited by jjmitchell60; 01-25-2011 at 02:17 PM..

01-25-2011, 05:27 PM	#4
rammed V.I.P. Member Join Date: Dec 2009 Location: Centerville Ohio Posts: 57	Re: Help..Jukar,Spain flintlock pistol, parts Could you post a pic of the broken part(s).

04-24-2011, 07:04 PM	#5
Blkdthrlm Member Join Date: Apr 2011 Posts: 3	Re: Help..Jukar,Spain flintlock pistol, parts Hello, I have an incomplete Jukar 45 BP pistol that is only minus the hammer assembly,complete otherwise.Take 45.00 for the whole thing. Last edited by Blkdthrlm; 04-24-2011 at 07:07 PM..

04-24-2011, 07:09 PM	#6
Hawg Advanced Senior Member Join Date: Mar 2011 Posts: 1,586	Re: Help..Jukar,Spain flintlock pistol, parts Trigger spring? There is no trigger spring.

04-26-2011, 11:13 PM	#7
Blkdthrlm Member Join Date: Apr 2011 Posts: 3	Re: Help..Jukar,Spain flintlock pistol, parts Your absolutely right, there are two springs that are indirect to the trigger.But without either of these the trigger will not operate. So which spring does he need? One is for hammer cam the other is for the trigger lever.