|
![]() |
|
|
TheFirearmsForum.com
FOUNDED: February 9, 2001 |
If you prefer to make a donation by check,
send an email to Support for the mailing address. |
|
|
#1 |
|
*TFF Admin Staff* In Heaven Now
Join Date: Jan 2003
Location: Sparta, MI / Now In Heaven Also
Posts: 2,880
|
lugerlvr
Member Posts: 4 (1/4/02 1:53:41 pm) | Edit | Del All Dry Fire Question -------------------------------------------------------------------------------- I recently purchased a H&K USP .40 and was wondering if it is ok to dry fire the gun without a 'snap cap'. The person I bought it from said that it was fine and actually good for the gun to be dry fired. I've heard so much on how you should never pull the trigger unless you have a live round or a 'snap cap'. Thanks. AntiqueDr Senior Chief Moderator Staff Posts: 1678 (1/4/02 2:27:41 pm) | Edit | Del ezSupporter Re: Dry Fire Question -------------------------------------------------------------------------------- Unless you just go nuts, its not going to hurt. If you intend to practice your sight alignment, etc, by dry-firing extensively it would be best to get the snapcaps. They're cheap enough. We Buy Guns! 1 - 100, Antique or Modern! www.apaxenterprises.com Different name V.I.P. Forum Host Posts: 935 (1/4/02 4:52:15 pm) | Edit | Del Re: Dry Fire Question -------------------------------------------------------------------------------- Thot "Dry Fire" was when ya eat napkins after having a few bouts with a Bloody Mary...... Real question: Who is a quality supplier of "Snap Caps"? Charlie D Thanx Edited by: Different name at: 1/4/02 4:53:25 pm gpostal Senior Chief Moderator Staff Posts: 1821 (1/4/02 5:05:34 pm) | Edit | Del Re: Dry Fire Question -------------------------------------------------------------------------------- "dry fire" is what i do after white castles "wet fire" well thats another thread kdub01 Senior Chief Moderator Staff Posts: 117 (1/4/02 7:03:30 pm) | Edit | Del Re: Dry Fire Question -------------------------------------------------------------------------------- Doc gave it to ya', straight. Dry firing a centerfire will not cause excessive damage unless done excessively. I always wince, tho, when dropping the hammer onto an empty chamber. Just my nature not to want to do it. Word of caution - NEVER, NEVER dry fire a rimfire!!! Gave a family heirloom Savage Mod 1913 .22 pump to a nephew. Little sucker played with it after I cautioned him not to, and he peened the chamber so that a cartridge wouldn't chamber and dulled the firing pin nose to the extent it barely indents the cases anymore. Naturally, no replacement parts are available. Little Bastard!!! Bob In St Louis Senior Chief Moderator Staff Posts: 1606 (1/4/02 9:17:42 pm) | Edit | Del Re: Dry Fire Question -------------------------------------------------------------------------------- Yup - centerfire OK, rimfire - a No-no. The recent batch of Romanian 22 trainer rifles imported are wonderful little guns. However, they have a reputation of quickly breaking the fire pins from dry firing. At a recent gun show, I had two Chinese 22 trainers, and two Polish 22 trainers sitting on my table. I closely watched anyone who picked them up, and warned them if they even looked like they might dry fire them. Crusty Cruffler of Fine Spanish Pistols - Eibar Rules! gun runner john Moderator Posts: 411 (1/5/02 10:52:16 am) | Edit | Del Re: Dry Fire Question -------------------------------------------------------------------------------- The general advice that centerfire is OK to dry-fire and rimfire is not is not universal. I've seen Luger and CZ-52 firing pins broken, and I received a P-38 with a broken firing pin that I suspect was from dry-firing. Also, most recent Ruger rimfires (20 years or so) have a block to protect the chamber and firing pin, and you can dry-fire them all day without harm. 280freak V.I.P. Member Posts: 329 (1/5/02 11:03:25 am) | Edit | Del Re: Dry Fire Question -------------------------------------------------------------------------------- GunRunnerJohn - Does that include the 10/22?
-->
|
|
|
|
![]() |
| Thread Tools | |
|
|