knight vision ignition problems - The Firearms Forum

connor992 · 09-26-2011, 10:45 PM

hello, i am having problems getting my knight vision to ignite primers. any ideas to what may be causing this? has anyone else had similar problems?
thanks, connor

brad87 · 09-28-2011, 01:19 PM

make sure they're seated fully, maybe buy some new ones and try them to see if yours got old or exposed to something, making them not fire. aside from that, springs would be next on my list to check.

connor992 · 11-01-2011, 09:09 AM

figured out the problem was the firing pin was damaged.. after a ten day wait for the new pin, i was able to install it, problem solved.

09-26-2011, 10:45 PM	#1
connor992 Member Join Date: Jan 2009 Location: illinois Posts: 10	knight vision ignition problems hello, i am having problems getting my knight vision to ignite primers. any ideas to what may be causing this? has anyone else had similar problems? thanks, connor -->

09-28-2011, 01:19 PM	#2
brad87 Former Guest Join Date: Jul 2011 Location: Central Indiana Posts: 85	Re: knight vision ignition problems make sure they're seated fully, maybe buy some new ones and try them to see if yours got old or exposed to something, making them not fire. aside from that, springs would be next on my list to check.

11-01-2011, 09:09 AM	#3
connor992 Member Join Date: Jan 2009 Location: illinois Posts: 10	Re: knight vision ignition problems figured out the problem was the firing pin was damaged.. after a ten day wait for the new pin, i was able to install it, problem solved.