High standard parts?? - The Firearms Forum

FishFind · 11-07-2011, 07:39 PM

I need to get a new recoil spring for a sport king sk-100
I am looking for the better 6.5lb springs not the factory 5.5 anyone know where to get any parts for this gun?

dusty9 · 11-07-2011, 08:35 PM

High Standard Mfg. Co. in Houston, Texas several years ago obtained all the rights, patents, etc. for High Standard pistols. They are manufacturing new pistols and parts for all of the old original High Standards. I ordered a new magazine from them for my Supermatic. Their website is http://www.highstandard.com/. They have parts catalogs on their web site, but I still called them with my full model number and serial number to confirm I had chosen the correct magazine. I found them to be pleasant people to deal with.

LDBennett · 11-08-2011, 08:52 AM

FishFind:

See your other post on Hi Std's, as to why you should not shoot anything but Std Vel ammo in your Hi Std.

When you up the recoil spring you move the slamming from the frame's slide stop to the face of the slide. In very short order the front surface of the slide will show signs of hammering. Stick with the stock 5.5# spring or the varible rate 6# spring from Wolff:

http://www.gunsprings.com/index.cfm?...D=1&mID=28#171

Brownells has the stock recoil spring as supplied by TX Hi Std:

http://www.brownells.com/.aspx/pid=7...Driving-Spring

You can also go directly to the TX HI Std company for parts but they are all available at Brownells under their OEM parts section. They are the same parts, exactly.

Many people have been down the path you are traveling, including me. I suggest you stop and go to the Rimfire Central/High Standard forum and get educated before you hurt your Hi Std pistol. I have several Hi Std pistols and had to learn the hard way as to how to treat them. Fortunately I have not cracked a frame but many others have.

LDBennett

11-07-2011, 08:35 PM	#2
dusty9 V.I.P. Member Join Date: Jan 2008 Location: West Texas Posts: 56	Re: High standard parts?? High Standard Mfg. Co. in Houston, Texas several years ago obtained all the rights, patents, etc. for High Standard pistols. They are manufacturing new pistols and parts for all of the old original High Standards. I ordered a new magazine from them for my Supermatic. Their website is http://www.highstandard.com/. They have parts catalogs on their web site, but I still called them with my full model number and serial number to confirm I had chosen the correct magazine. I found them to be pleasant people to deal with. Last edited by dusty9; 11-07-2011 at 08:36 PM..

11-08-2011, 08:52 AM	#3
LDBennett Advanced Senior Member Join Date: Dec 2003 Location: Hesperia, CA Posts: 5,719	Re: High standard parts?? FishFind: See your other post on Hi Std's, as to why you should not shoot anything but Std Vel ammo in your Hi Std. When you up the recoil spring you move the slamming from the frame's slide stop to the face of the slide. In very short order the front surface of the slide will show signs of hammering. Stick with the stock 5.5# spring or the varible rate 6# spring from Wolff: http://www.gunsprings.com/index.cfm?...D=1&mID=28#171 Brownells has the stock recoil spring as supplied by TX Hi Std: http://www.brownells.com/.aspx/pid=7...Driving-Spring You can also go directly to the TX HI Std company for parts but they are all available at Brownells under their OEM parts section. They are the same parts, exactly. Many people have been down the path you are traveling, including me. I suggest you stop and go to the Rimfire Central/High Standard forum and get educated before you hurt your Hi Std pistol. I have several Hi Std pistols and had to learn the hard way as to how to treat them. Fortunately I have not cracked a frame but many others have. LDBennett

11-07-2011, 07:39 PM	#1
FishFind Member Join Date: Nov 2011 Posts: 7	High standard parts?? I need to get a new recoil spring for a sport king sk-100 I am looking for the better 6.5lb springs not the factory 5.5 anyone know where to get any parts for this gun? -->