First batch of 3006

mvmtoys · 08-19-2012, 07:04 PM

Well I managed to load up my first reloads and I must say it all seems pretty simple, and I am thrilled with my first attempt at reloading, but I do have some concerns. I am loading for 3006 using Honraday 150gr SST bullets, 52grains of H4350, winchester cases and CCI Large Rifle primers. I fired my first 3 reloads and at 100 yards I am able to lay a nickel over the group. Needless to say I am more then pleased my concern is the rifle is noticably louder and the recoil is quite a bit more then the factory ammo that I have been shooting. I see no signs of excessive pressure looking at the spent cases, and I can live with the recoil, is this common shooting reloads? Sorry if it is a dumb question but I would sure like to put my mind to rest. Thanks

Skipper · 08-19-2012, 07:21 PM

Your load is within the limits set by Hodgdon and it sounds OK. 4350 is a slow powder so the muzzle blast may be a little louder than normal. If you're shooting groups like that with no pressure signs, I wouldn't change a thing!

woolleyworm · 08-19-2012, 07:27 PM

each powder is going to have different characteristics and results. If you have any hesistations at all, get a chrony and know your velocities. This is a key indicator that you can use. A chrony is well worth the money and adds to peace of mind.

mvmtoys · 08-19-2012, 08:10 PM

thanks for the feedback guys, makes me feel better. A chronograph is deffinitly in my future but afraid not anytime real soon, as money is a bit tight. I must say this reloading is addictive I am HOOKED.........

08-19-2012, 07:04 PM	#1
mvmtoys Member Join Date: Jul 2012 Location: Missouri Posts: 14	First batch of 3006 Well I managed to load up my first reloads and I must say it all seems pretty simple, and I am thrilled with my first attempt at reloading, but I do have some concerns. I am loading for 3006 using Honraday 150gr SST bullets, 52grains of H4350, winchester cases and CCI Large Rifle primers. I fired my first 3 reloads and at 100 yards I am able to lay a nickel over the group. Needless to say I am more then pleased my concern is the rifle is noticably louder and the recoil is quite a bit more then the factory ammo that I have been shooting. I see no signs of excessive pressure looking at the spent cases, and I can live with the recoil, is this common shooting reloads? Sorry if it is a dumb question but I would sure like to put my mind to rest. Thanks -->

08-19-2012, 07:21 PM	#2
Skipper V.I.P. Member Join Date: Jul 2008 Location: People's Republic of Kalifornia Posts: 335	Re: First batch of 3006 Your load is within the limits set by Hodgdon and it sounds OK. 4350 is a slow powder so the muzzle blast may be a little louder than normal. If you're shooting groups like that with no pressure signs, I wouldn't change a thing!

08-19-2012, 07:27 PM	#3
woolleyworm TFF Moderator/Host Join Date: Feb 2009 Location: SW Fort Worth Contributor Posts: 4,881	Re: First batch of 3006 each powder is going to have different characteristics and results. If you have any hesistations at all, get a chrony and know your velocities. This is a key indicator that you can use. A chrony is well worth the money and adds to peace of mind. __________________ . What are you gonna do, talk the alien to death? -- (on Sigourney Weaver's worry about Guns in Aliens) "Safety is something that happens between your ears, not something you hold in your hands." "I carry a small gun to compensate for my huge Blue press." .

08-19-2012, 08:10 PM	#4
mvmtoys Member Join Date: Jul 2012 Location: Missouri Posts: 14	Re: First batch of 3006 thanks for the feedback guys, makes me feel better. A chronograph is deffinitly in my future but afraid not anytime real soon, as money is a bit tight. I must say this reloading is addictive I am HOOKED.........