components? - The Firearms Forum

socalfamous87 · 12-02-2011, 07:34 PM

anyone looking to sell any reloading components? i just got my first press. its a jr2( just something to start off with) looking to reload 9mm, .223, 38special, 7.62x39. thanks looking for brass, bullets, primers,dies.... thanks again.

cycloneman · 12-02-2011, 08:06 PM

I would say the best place to find some of that stuff is at a gun show. Or you can order from any of the number of suppliers online.

American Leader · 12-02-2011, 08:20 PM

I agree with cycloneman. Most online distributors have sells regularly, don't get too excited and you can buy what you need at discounted prices a little at a time until you get what you need. IE Midway USA has monthly sells that overlap, so you can check out what they have you need and save a little cash. Check out Sinclair Intl., Brownells, and MidSouth Supply on the internet as well.

312shooter · 12-02-2011, 10:52 PM

Shopping at gunshows can be risky at best, using brass (particulary rifle) from unknown source and history can quickly become unsafe, and have proven itself with a few reloaders I know. The vendors I have witnessed at gunshows were entirely overpriced and will not even catch a glance from me. www. brassmanbrass.com is a good reliable source for brass and he runs a good shop. I'm with Amercian Leader - dont jump on the first deal you find, dig a little and be smart about your prices, afterall you are reloading, you must have a penny pinching bone somewhere, we all do.

gdmoody · 12-03-2011, 09:31 AM

Bullets:
http://www.berrysmfg.com/
http://www.billybullets.com/Index.aspx
http://www.missouribullet.com/index.php among others

Bullets, primers, dies, brass and other stuff:
http://www.midsouthshooterssupply.com/
http://www.midwayusa.com/
http://www.powdervalleyinc.com/
http://www.precisionbrass.net/index.html
and my favorite: http://www.grafs.com/

Gun shows or local gun shops are good ideas for the powder and primers because you don't have to pay a hazmat fee with them. Every once in a while Grafs has a deal where if you buy so many of something, they pay the hazmat fees.

Charleyadams · 12-20-2011, 08:27 PM

If you still need 9mm after Christmas I can help you out. I need to go through my brass and clean some out. I know I have way more 9mm than I can use.

medalguy · 12-20-2011, 11:11 PM

Same here with .223. I have quite a bit of what I believe is once fired brass, most is commercial brass. Let me know if you8 want it, and after Christmas I can send you a hundred or so if that'll help get you off to a good start. I also have some 55 gr FMJ bullets you can have with the brass.

You can't ship primers or powder without a hazmat permit, but folks here might have some extra brass or bullets they might give you. Also check the for sale section of this forum.

Charleyadams is a brand new poster and already offering to give away extra brass. Come on guys, anyone else got extras you might share with a newbie?

socalfamous87 · 12-21-2011, 02:45 AM

Quote:

Originally Posted by Charleyadams

If you still need 9mm after Christmas I can help you out. I need to go through my brass and clean some out. I know I have way more 9mm than I can use.

pm sent

socalfamous87 · 12-21-2011, 02:48 AM

Quote:

Originally Posted by medalguy

Same here with .223. I have quite a bit of what I believe is once fired brass, most is commercial brass. Let me know if you8 want it, and after Christmas I can send you a hundred or so if that'll help get you off to a good start. I also have some 55 gr FMJ bullets you can have with the brass.

You can't ship primers or powder without a hazmat permit, but folks here might have some extra brass or bullets they might give you. Also check the for sale section of this forum.

Charleyadams is a brand new poster and already offering to give away extra brass. Come on guys, anyone else got extras you might share with a newbie?

pm sent

Dirtypacman · 12-21-2011, 12:40 PM

I have an extra set of 9mm dies - RCBS if I remember correctly.

In the spirit of the season I will offer them too you - in return I ask you do the same for someone else sometime in the future with what you can spare. Pay it forward

PM if you would like them

socalfamous87 · 12-21-2011, 01:03 PM

Quote:

Originally Posted by Dirtypacman

I have an extra set of 9mm dies - RCBS if I remember correctly.

In the spirit of the season I will offer them too you - in return I ask you do the same for someone else sometime in the future with what you can spare. Pay it forward

PM if you would like them

pm sent

12-02-2011, 07:34 PM	#1
socalfamous87 V.I.P. Member Join Date: Sep 2011 Posts: 112	components? anyone looking to sell any reloading components? i just got my first press. its a jr2( just something to start off with) looking to reload 9mm, .223, 38special, 7.62x39. thanks looking for brass, bullets, primers,dies.... thanks again. -->

12-02-2011, 08:06 PM	#2
cycloneman Advanced Senior Member Join Date: Dec 2008 Location: Louisiana Posts: 7,408	Re: components? I would say the best place to find some of that stuff is at a gun show. Or you can order from any of the number of suppliers online. __________________ Who are you going to serve today?

12-02-2011, 08:20 PM	#3
American Leader Advanced Senior Member Join Date: Mar 2011 Location: Iowa Contributor Posts: 1,630	Re: components? I agree with cycloneman. Most online distributors have sells regularly, don't get too excited and you can buy what you need at discounted prices a little at a time until you get what you need. IE Midway USA has monthly sells that overlap, so you can check out what they have you need and save a little cash. Check out Sinclair Intl., Brownells, and MidSouth Supply on the internet as well.

12-02-2011, 10:52 PM	#4
312shooter Advanced Senior Member Join Date: Mar 2008 Location: Las Vegas NV Posts: 1,148	Re: components? Shopping at gunshows can be risky at best, using brass (particulary rifle) from unknown source and history can quickly become unsafe, and have proven itself with a few reloaders I know. The vendors I have witnessed at gunshows were entirely overpriced and will not even catch a glance from me. www. brassmanbrass.com is a good reliable source for brass and he runs a good shop. I'm with Amercian Leader - dont jump on the first deal you find, dig a little and be smart about your prices, afterall you are reloading, you must have a penny pinching bone somewhere, we all do. __________________ "Democracy is based on citizenship- perhaps the greatest gift the United States has given to the world- Power is vested in the people themselves, and government flows from the people" James M Henslin

12-03-2011, 09:31 AM	#5
gdmoody Advanced Senior Member Join Date: Sep 2007 Location: Northeast Georgia Contributor Posts: 6,355	Re: components? Bullets: http://www.berrysmfg.com/ http://www.billybullets.com/Index.aspx http://www.missouribullet.com/index.php among others Bullets, primers, dies, brass and other stuff: http://www.midsouthshooterssupply.com/ http://www.midwayusa.com/ http://www.powdervalleyinc.com/ http://www.precisionbrass.net/index.html and my favorite: http://www.grafs.com/ Gun shows or local gun shops are good ideas for the powder and primers because you don't have to pay a hazmat fee with them. Every once in a while Grafs has a deal where if you buy so many of something, they pay the hazmat fees. __________________ NRA Endowment Member GeorgiaCarry.Org Member Retired US Army Postal Worker Personally, I carry a gun because I'm too young to die and too old to take an ass whoopin'.....author unknown (but obviously brilliant)

12-20-2011, 08:27 PM	#6
Charleyadams Member Join Date: Aug 2011 Posts: 1	Re: components? If you still need 9mm after Christmas I can help you out. I need to go through my brass and clean some out. I know I have way more 9mm than I can use.

12-20-2011, 11:11 PM	#7
medalguy Senior Member Join Date: Feb 2009 Posts: 585	Re: components? Same here with .223. I have quite a bit of what I believe is once fired brass, most is commercial brass. Let me know if you8 want it, and after Christmas I can send you a hundred or so if that'll help get you off to a good start. I also have some 55 gr FMJ bullets you can have with the brass. You can't ship primers or powder without a hazmat permit, but folks here might have some extra brass or bullets they might give you. Also check the for sale section of this forum. Charleyadams is a brand new poster and already offering to give away extra brass. Come on guys, anyone else got extras you might share with a newbie? Last edited by medalguy; 12-20-2011 at 11:12 PM..

12-21-2011, 12:40 PM	#10
Dirtypacman Senior Member Join Date: Mar 2008 Location: Merrimac Valley, MA Posts: 908	Re: components? I have an extra set of 9mm dies - RCBS if I remember correctly. In the spirit of the season I will offer them too you - in return I ask you do the same for someone else sometime in the future with what you can spare. Pay it forward PM if you would like them __________________ Member HHRG and HSC, NRA Life Member, GOAL Member LTC-A