A question for Jack404

Discussion in 'The Hunting & Fishing Forum' started by hstout1143, Aug 20, 2012.

  1. hstout1143

    hstout1143 Well-Known Member

    Joined:
    Jan 3, 2012
    Messages:
    2,609
    Location:
    California
    A question for Jack404 or anyone that knows about tanning hides.

    Deer season will be here in a couple of months and in the event that I get one , I would like to try and turn the hide into some chaps or something. What would be the best way of going about turning the hide into leather?
    Last edited: Aug 20, 2012
  2. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,592
    Location:
    Australia
    never worked hides before ?

    i'll find a page of shoshawnee (sp?) leather working info its probably the easiest

    you really gotta work it though to get em soft afterwards , thats the real secret , back with the info in a while
  3. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,592
    Location:
    Australia
  4. hstout1143

    hstout1143 Well-Known Member

    Joined:
    Jan 3, 2012
    Messages:
    2,609
    Location:
    California
    Thanks Jack.
  5. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,592
    Location:
    Australia
    aint found the one i want for you ( too many book marks and calves to be fed )

    its a english lady who lived with american indians documenting how they did it , but the UNM one is very good too ..

    you dont get the same plants that i use here , but the tannins will be needed to preserve the hide , so we'll get the right one for you or i guess we write it up from scratch
  6. hstout1143

    hstout1143 Well-Known Member

    Joined:
    Jan 3, 2012
    Messages:
    2,609
    Location:
    California
    I heard the American Indians would chew the hides to soften them, I think I'll skip that part.
  7. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,592
    Location:
    Australia
    yeah , deer would not be so bad , fox hides or wolverine something with that stink ..

    pass

    found it

    the US version anyway

    http://www.manataka.org/page27.html

    or this


    A good portion of your deer's live weight is made up by the hide. Having a tanned hide from a deer that you have taken can add to your sense of accomplishment. It is also a good feeling to know that nothing has gone to waste.

    Tanning Deer Hides

    Skin your deer keeping the hide in one piece. Make cuts on the insides of the legs if possisble: This will add to the attractiveness of your finished hide. While skinning your deer try not to cut holes into the skin because this will be difficult to repair and can be hard to work around.

    After the hide is removed from the carcass, be sure to skin the tail as well. The bones should be removed by making a cut along the underside of the tail.

    Follow the 7 steps outlined below:

    Step 1
    The first and most important step in tanning your deer hide is to remove the fat, membranous tissue and any remaining flesh from the deer skin. This is done by laying the hide on some type of raised surface such as a sawhorse and scraping the flesh side with a long bladed knife. It is important that your knife be sharp and that every last bit of tissue is removed from the skin. If any tissue is left on the hide, it will not tan in those areas. If you plan to tan the hide with the hair on, skip steps 2&3 and proceed with step 4. If you plan to remove the hair and tan the hide into a "buckskin", go to step 2.

    Step 2
    To remove the hair from the hide and make a buckskin, do the following:
    In a large plastic garbage can mix: 1 gallon of hardwood ashes
    2 pounds of household (slaked) lime
    5 gallons of warm water

    Stir the above mixture until it is dissolved. Completely immerse the deer skin in the mixture. Stir the mixture 2 or 3 times a day until the hair comes off easily. This will take 2 to 3 days. If the hide is left in the mixture too long, it will begin to deteriorate. After you remove the hide,
    proceed to step 3.

    Step 3
    Rinse the hide with water. Place the hide on a raised surface with the hair side up. Use the back of a knife blade to scrape off the hair. Rinse the dehaired skin several times with clean water. Soak the hide for 24 hours in the garbage can in a mixture of 10 gallons water and 2 quarts vinegar. Stir this mixture with the hide in it every few hours. At the end of this 24 hour period, empty the garbage can and fill it with clean water. Soak the hide in the clean water overnight. Go to step 4

    Step 4
    In a small plastic bucket, dissolve 1 pound of alum in one gallon of warm water. In the garbage can, dissolve 2 1/2 pounds of salt in 4 gallons of water. Pour the solution from the small bucket into the garbage can and mix thoroughly. Immerse the skin and soak for 6 to 8 days. Stir the mixture 2 times each day to make sure that all parts of the hide are exposed to the mixture. After the soaking period, remove the skin and drain it thoroughly. Rinse the skin with running water for approximately 15 minutes. Go to step 5

    Step 5
    Tack the wet hide to a flat surface such as a sheet of plywood. If you have opted to leave the hair on the hide, tack the skin on the surface with the flesh side facing out. Keep the skin out of the sun but allow it to partially dry. When the skin is almost dry, rub it with a light coating of warm neat's-foot oil. Remove it from the board and repeat the process on the other side. Remove excess oil from the hide with an absorbant cloth. Proceed to step 6

    Step 6
    Dampen the skin with a moist cloth. DO NOT get the hide too wet! Rub the skin over a dull edge such as a saw horse until it is supple and soft like a chamois cloth. As the softening progresses SPARINGLY apply some warm neat's-foot oil to the hide. If you are working with a hide with the hair still on, only work on the flesh side. Proceed to step 7

    Step 7
    After the hide has been softened, rub some fine grit sandpaper over every square inch of exposed skin to smooth the surface. Only do the flesh side of hides with the hair still on. When the hide takes on a smooth appearance, it is ready to be used as a rug, wall hanging, or sewn into some other type of useful item.


    from shanepotter.com

    he gets out this way bow hunting big buff , no foolin !!


    and here's Dana's blog

    http://girlinanapron.blogspot.com.au/2011/02/tanning-deer-hide.html
    Last edited: Aug 20, 2012
Similar Threads
Forum Title Date
The Hunting & Fishing Forum Dog Training Question Jan 20, 2014
The Hunting & Fishing Forum cross bow questions Nov 2, 2013
The Hunting & Fishing Forum I have a "bow" question Sep 20, 2013
The Hunting & Fishing Forum An age old question. Aug 22, 2013
The Hunting & Fishing Forum Texas Hog Hunting Questions May 15, 2013

Share This Page