best gun oil?

Discussion in 'Technical Questions & Information' started by 38 special, Mar 9, 2009.

  1. 38 special

    38 special New Member

    Joined:
    Feb 14, 2009
    Messages:
    548
    for oiling the exterior of blued steel (especially colt royal blue), what gives best protection : remington oil,breakfree,plain sewing machine oil, hoppes oil, or other?
  2. JLA

    JLA Well-Known Member

    Joined:
    Feb 26, 2007
    Messages:
    18,271
    Location:
    Heart Of Texas
    I like rem oil for the external surfaces of firearms, but for moving parts and bore surfaces m-pro 7 is absolutely unbeatable...
  3. tailgunner

    tailgunner New Member

    Joined:
    Mar 3, 2009
    Messages:
    10
    Location:
    GA
  4. chemfantry

    chemfantry New Member

    Joined:
    Mar 29, 2008
    Messages:
    305
    Location:
    Ft. Campbell, KY
  5. Monkey Hollow

    Monkey Hollow Member

    Joined:
    Feb 15, 2009
    Messages:
    65
    Location:
    Pennsylvania
    I have been using BreakFree CLP since 1980, and really like it a lot. Then, one day last year, I read about EEZOX on the net and ordered a quart. I am really pleased with EEZOX and will never be without it. The difference is BreakFree goes on wet and leaves a "wet" film on the metal. EEZOX goes on wet just like BreakFree, then the carrier evaporates leaving a totally dry film on the metal. I also bought the EEZOX Knife Care and the EEZOX Cycle Chain Lube to try. They are also fine. We have a lot of trails with coal dirt around here that gets kicked up onto a chain that is lubed with a wet lube. Since the EEZOX is totally dry, the dirt just falls right back off the chain. When I run out of any EEZOX, I am going to order it by the gallon. I still like BreakFree for internals like slide rails and cleaning off cosmoline.
  6. colt

    colt New Member

    Joined:
    Jan 19, 2009
    Messages:
    147
    Location:
    Ky.
    Thanks for the info Monkey Hollow. I use CLP and think it is very good, but will now try EEZOX.
  7. olmossbak

    olmossbak New Member

    Joined:
    Feb 12, 2009
    Messages:
    212
    Location:
    NE Tenn
    Where do you get EEZOX?

    Tnx,
  8. chemfantry

    chemfantry New Member

    Joined:
    Mar 29, 2008
    Messages:
    305
    Location:
    Ft. Campbell, KY
  9. new308handloader

    new308handloader New Member

    Joined:
    Jan 11, 2009
    Messages:
    535
    Location:
    Maryville, TN
    Microlon Gun Juice
    I thought it was a gimic....but after applying to the exterior of all my guns, I am a believer.....you cannot leave finger prints, it will not rust...this stuff is awsome!
  10. LurpyGeek

    LurpyGeek Active Member

    Joined:
    Nov 30, 2005
    Messages:
    1,436
    Location:
    UT
    Militec works fine for me. Haven't tried much else.
  11. pawn

    pawn Active Member

    Joined:
    Jan 31, 2007
    Messages:
    1,489
    Location:
    Crossville, TN
    i like Butch's Gun Oil for the bore, Break Free CLP for moving parts and exterior
  12. olmossbak

    olmossbak New Member

    Joined:
    Feb 12, 2009
    Messages:
    212
    Location:
    NE Tenn
    Tnx Chemfantry, just ordered a few years stock.
  13. Vasily Zaytsev

    Vasily Zaytsev New Member

    Joined:
    Mar 17, 2009
    Messages:
    72
    Dang, and Im still using LSA
  14. Haligan

    Haligan Well-Known Member

    Joined:
    Feb 25, 2008
    Messages:
    2,062
    Location:
    FEMA Region II
    Heck I use WD-40, for cleaning and protecting.
  15. punchie

    punchie Member

    Joined:
    Apr 27, 2004
    Messages:
    784
    Location:
    Chesterfield, VA
    Motor Kote
Similar Threads
Forum Title Date
Technical Questions & Information best product/solution for removing wood stain from rifle stock Jul 31, 2014
Technical Questions & Information Best strategy for removing heavy rust from revolver Mar 24, 2014
Technical Questions & Information Best Night Sights? Nov 29, 2013
Technical Questions & Information Remington 760 Gamemaster Carbine ... which ammo shoots best? Nov 21, 2013
Technical Questions & Information Best 9mm Load for PP? Oct 30, 2013

Share This Page