CZ52 Rear Sight Adjustment

Discussion in 'Technical Questions & Information' started by swpitman1232, Sep 17, 2008.

  1. swpitman1232

    swpitman1232 New Member

    Joined:
    Sep 3, 2008
    Messages:
    2
    Rear sight is way off and dove tail slide has been punched twice by factory.
    Used punch and hammer trying to slide sight over, but won't budge.
    Do they make a rear sight adjustment tool for the CZ52?
    Any suggestions?
    Thanks
  2. nineteen_eleven

    nineteen_eleven Former Guest

    Joined:
    Sep 21, 2008
    Messages:
    9
    Location:
    IN A WORLD OF MY OWN
    Which ever way it is sitting, either to the R or to the L, try pushing it on out the way it is already started and insert from other side when you replace it. Sometimes, parts are designed to only go one way...
Similar Threads
Forum Title Date
Technical Questions & Information CZ52 SOFT HAMMER STRIKE Sep 4, 2008
Technical Questions & Information 9MM Lugar Barrels for CZ52 Aug 30, 2007
Technical Questions & Information Rear sight identification Nov 29, 2014
Technical Questions & Information 1907 Winchester SRC rear sight? Nov 27, 2014
Technical Questions & Information firing pin for a 16 gauge single barrel Iver Johnson firearms & cycleworks shotgun Sep 27, 2014

Share This Page