1. Get Gear'd Up! Enter to WIN $1000 in gear!

    Please Click Here for full details and to enter. You will need to be registered and logged in to view the details and to participate.

    Thanks and good luck to everyone

H&R DEL 176 10 ga mag

Discussion in 'The Ask the Pros & What's It Worth? Forum' started by gordo52, Sep 26, 2010.

  1. gordo52

    gordo52 New Member

    Joined:
    Sep 26, 2010
    Messages:
    1
    inherited a h&r 10 ga mag shotgun trying to find what its worth would like to trade for a big game rifle any help would be great thanks
  2. 3/2 STA SS

    3/2 STA SS Active Member

    Joined:
    Aug 9, 2010
    Messages:
    1,577
    Location:
    Tampa Bay Area, FL
    Is it a single shot?
  3. b.goforth

    b.goforth New Member

    Joined:
    Dec 30, 2003
    Messages:
    3,174
    Location:
    houston, tx
    MODEL 176 MAGNUM----------------------------------(Fall)1975-1986
    Single Barrel Heavy Frame, Side Lever Break Open Action (Patent No. 2,876,576), Self-Adjusting Barrel Latch, Auto-Ejector, Three Piece Take Down (Screw Retained Forearm), Barrel Lengths 32 to 36 inches, Full Choke Only, Finish Case Hardened Frame & Blue Barrel, Pistol Griped Walnut Stained Hardwood Butt-Stock & Semi Beaver-Tail Forearm, Ventilated Rubber Recoil Pad, Butt-Stock Length of Pull 14½ inches, Drop: at Comb 1¾ inches, at Heel 2½ inches, Overall Lengths 47 to 51 inches.
    1975-1976-Production-Rebounding Hammer 10 Gauge, 3 ½ inch Chamber, 36 inch Barrel, 9½ Pounds 51 inches in length
    1977-1981-Production- Transfer Bar Ignition System (Patent No. 3,988,848 dated November 2, 1976) 10 Gauge, 3 ½ inch Chamber, 32 & 36 inch Barrels, 9¼ & 9½ Pounds 47 & 51 inches in length, 12 Gauge, 3 inch Chamber, 32 & 36 inch Barrels, 9 & 9¼ Pounds 47 to 51 inches in length, 16 Gauge, 2¾ inch Chamber, 32 inch Barrel, 9 Pounds 47 inches in length, 20 Gauge, 3 inch Chamber, 32 inch Barrel, 9 Pounds 47 inches in length
    1982-1986-Production- 10 Gauge, 3 inch Chamber, 32 & 36 inch Barrels, 9½ & 9¾ Pounds 47 to 51 inches in length
    VALUE: 100%=$355 60%=$175 Add 15% premium for 10 gauge and 36” barrel

    MODEL 176 SLUG GUN----------------------------------------1982-1986
    Single Barrel Heavy Frame, Side Lever Break Open Action (Patent No. 2,876,576), Self-Adjusting Barrel Latch, Auto-Ejector, Three Piece Take Down (Screw Retained Forearm), 10 Gauge (3 ½ inch Chamber), Barrel Length 28 inches, Cylinder Bore Choke, Bored Special for Rifled Slugs Finish Case Hardened Frame & Blue Barrel, Pistol Griped Walnut Stained Hardwood Butt-Stock & Semi Beaver-Tail Forearm, Ventilated Rubber Recoil Pad, Butt-Stock Length of Pull 14½ inches, Drop: at Comb 1¾ inches, at Heel 2½ inches, 9¼ Pounds, Overall Lengths 44¼ inches.
    VALUE: 100%=$375 60%=$200

    with the letter codes prefix to the serial number i can give you the manufature date.
    bill
  4. Old Grump

    Old Grump New Member

    Joined:
    Feb 21, 2010
    Messages:
    2,320
    Location:
    Little hut in the woods near Blue River Wisconsin
    I paid $140 for mine second hand in like brand new condition. It has since become my favorite bang stick. One shot at a time is plenty in my book and after 3 or 4 shots with it I'm ready to switch to the 20 gauge. :D The damage it creates with any size shot from #6 to #3 is tremendous. Buck shot is a little less effective because the full choke spreads it out and I don't shoot slugs through it because I just don't put slugs through a full choke but #4 lead or #3 steel shot will really get your targets attention with a nice even spread of the shot.

Share This Page