1. Get Gear'd Up! Enter to WIN $1000 in gear!

    Please Click Here for full details and to enter. You will need to be registered and logged in to view the details and to participate.

    Thanks and good luck to everyone

H&R Model 650 22Cal Nickel

Discussion in '.22-Rimfire Forum' started by floydl13, Apr 19, 2011.

  1. floydl13

    floydl13 New Member

    Joined:
    Apr 19, 2011
    Messages:
    3
    Just acquired this H&R model 650 and I need to find a 22 mag cylinder. I have the product number below. I check Numrich who has it listed "Out of Stock". Does anyone know of a good source?


    Cylinder, .22 Mag, 6 Shot, Nickel
    Product No. 276250


    Thanks,
    Floyd

    Attached Files:

  2. jamesjo

    jamesjo New Member

    Joined:
    Apr 6, 2008
    Messages:
    438
    Location:
    Nebraska
    Floyd,
    Good luck!
    Numrich has been sold out for at least a few years.
    They are scarce, to bad, I just sold my spare a couple months ago. $85 I believe.
    I have bought a lot of spare cylinders over the years, only found 2 nickel mag cylinders, and 1 nickel lr cylinder. You just don't see them.
    Keep watching the auctions, and you may luck out someday.
    You can always buy a mag cylinder for one of the blue H&R's.
    It will function in your 650 fine, just won't match finish wise.
    When you display it, put the lr cylinder back in.
    I have 8 H&R convertibles, here's a pic of my model 650

    [​IMG]
    Last edited: Apr 19, 2011
  3. floydl13

    floydl13 New Member

    Joined:
    Apr 19, 2011
    Messages:
    3
    Thanks for the reply James, 8 wow! thats a big collection. If they all look like the one in the photo above you have a very nice collection.
    I kind of thought this was going to be difficult. I like your idea to purchase the blue model cylinder from another model. I assume the 649 model would be fine. I wonder how hard it would be to have the cylinder nickeled. Thanks again for the info. I hope to have mine out by the end of the month and see how she shoots.
  4. jamesjo

    jamesjo New Member

    Joined:
    Apr 6, 2008
    Messages:
    438
    Location:
    Nebraska
    Floyd,
    Lots of people may be tired of seeing them, but I'm not tired of showing them off!
    Here's my other convertibles.
    If you decide to buy a blue cylinder, I have one that functions perfectly, but someone took a bunch of the bluing off where the caliber is stamped. It would make a perfect candidate for being replated.
    or just shoot it as is.
    Jim


    Model 649 5.5" 1980
    [​IMG]

    Model 649 7.5" 1980
    [​IMG]

    Model 686 4.5" 1980
    [​IMG]

    Model 686 5.5" 1980
    [​IMG]

    Model 686 7.5" 1980
    [​IMG]

    Model 686 10" 1982
    [​IMG]

    Model 686 12" 1980
    [​IMG]
  5. floydl13

    floydl13 New Member

    Joined:
    Apr 19, 2011
    Messages:
    3
    James...very nice collection, I can see why you like this manufacturer. I appreciate you showing me these photos. Do you fire these frequently and if so have you experienced any mechanical problems?
    I would be interested in the cylinder, how much are you asking for it? I'm not sure what it will run to re-plate, I will look into it on my end.
    Thanks again,
    Floyd
  6. jamesjo

    jamesjo New Member

    Joined:
    Apr 6, 2008
    Messages:
    438
    Location:
    Nebraska
    Floyd,
    I have never fired the 10", and only fired the 4.5" a few times.
    The rest of them I have shot.
    Health issues have kept me from any shooting for quite some time, but they are all very good shooters, not target accuracy, but still better than I am capable of taking advantage of!
    Have had no problems with any of the convertibles!
    Sent you a PM, so check your messages.
    Jim
  7. fleetwood1976

    fleetwood1976 Active Member

    Joined:
    Feb 22, 2009
    Messages:
    1,433
    Location:
    Southern Indiana
    the case color ones are sweet. I got a 949 and 999 but just long rifle cylinder and all blue.
    Last edited: Apr 20, 2011
  8. American Leader

    American Leader Well-Known Member

    Joined:
    Mar 1, 2011
    Messages:
    1,717
    Location:
    Iowa
    Nice collection james! Your H&R is sweet floyd!
  9. jamesjo

    jamesjo New Member

    Joined:
    Apr 6, 2008
    Messages:
    438
    Location:
    Nebraska
    I'm hijacking the H&R thread a little, but, I do have one more convertible that I don't show very often.
    High Standard, High Sierra

    [​IMG]
    Last edited: Apr 20, 2011
  10. Bill DeShivs

    Bill DeShivs Well-Known Member

    Joined:
    Apr 7, 2006
    Messages:
    1,748
    I can nickel plate your cylinder. If the metal finish matches the gun's finish (new or like new cylinder), all I have to do is strip the bluing, and plate it. I can't guarantee a surface finish match, as I don't have an FFL, and can't accept the frame.
  11. flyingtiger85

    flyingtiger85 Well-Known Member

    Joined:
    Aug 24, 2010
    Messages:
    1,541
    Location:
    Nevada
    Floyd,that is a very nice H&R-650 thank's for the picture.Also,JamesJo I enjoy seeing your collection and I'm sure all the other H&R lovers do also.Keep the pictures coming!
  12. Jim Hauff

    Jim Hauff New Member

    Joined:
    Apr 20, 2008
    Messages:
    2,976
    Location:
    Lehigh Valley, PA
    Floyd and Bill DeShivs,
    The 650s had a matte, electroless nickel finish and the cylinders were high polish nickel.
    IMG_4864_2.jpg
  13. jamesjo

    jamesjo New Member

    Joined:
    Apr 6, 2008
    Messages:
    438
    Location:
    Nebraska
    Here's another finish comparison pic of my 650.
    Frame on mine seems to have more of a polished finish than the example Jim Hauff is showing.

    Jim, what model # do you have shown here?


    Floyd, I've got the cylinder all boxed up, and ready to go!

    [​IMG]
    Last edited: Apr 24, 2011
  14. Bobn10

    Bobn10 New Member

    Joined:
    Jul 25, 2011
    Messages:
    1
    i recently bought a H&R 650 with 22LR & 2 Mag cylinders. all look like they been "under the seat" too long but work fine. would sell the extra mag cylinder. make offer
    Last edited: Sep 6, 2011
  15. Pustic

    Pustic Member

    Joined:
    Oct 10, 2008
    Messages:
    204
    Location:
    Western Kentucky
    Here's my 650. :)

    Attached Files:

Similar Threads
Forum Title Date
.22-Rimfire Forum S&W Model 63 Kit Gun Oct 8, 2014
.22-Rimfire Forum Winchester model 63 Oct 3, 2014
.22-Rimfire Forum J Stevens model 14 1/2 Little Scout Oct 2, 2014
.22-Rimfire Forum New S&W Model 41 mags don't fit??? Oct 2, 2014
.22-Rimfire Forum H&R Sportsman Model 999 Sep 30, 2014

Share This Page