hornady free bullets

Discussion in 'The Ammo & Reloading Forum' started by harleyhobie, Feb 7, 2010.

  1. harleyhobie

    harleyhobie New Member

    Joined:
    Aug 14, 2009
    Messages:
    19
    Location:
    chester va
    Does anybody have a good way to get the upc off the hornady dies cases. I've tried getting it damp and using blow dryer. putting it in freezer for a while either way it won't come off without ruining it.
    Thanks
  2. ejjett

    ejjett New Member

    Joined:
    Feb 3, 2010
    Messages:
    1
    Hairdryer for 15-20 seconds. Then carve around the UPC with a knife and peel it off. Be careful with the ink on the label until it cools so it doesn't smudge.
  3. jdon72

    jdon72 New Member

    Joined:
    Feb 3, 2009
    Messages:
    340
    I have sent mine in by using a razor blade and the paper was thin and ripped. No problem getting the bullets...they have to assume that if you have the receipt and the ripped paper, it is good enough. They put the damn thing in a bad spot anyway.

    J
  4. zkovach

    zkovach Active Member

    Joined:
    Oct 7, 2009
    Messages:
    1,011
    Location:
    Michigan
    a product called goof - off works amazing on labels.
  5. JLA

    JLA Well-Known Member

    Joined:
    Feb 26, 2007
    Messages:
    18,271
    Location:
    Heart Of Texas
    I soaked mine with rem oil. it came right off after about 10 or 15 minutes.
  6. BETH

    BETH Well-Known Member

    Joined:
    Jul 10, 2009
    Messages:
    6,887
    Location:
    naugatuck,Ct.
    Goo Gone comes in a bottle u can get it at home depot great for getting sticky off or nail polish remover
  7. harleyhobie

    harleyhobie New Member

    Joined:
    Aug 14, 2009
    Messages:
    19
    Location:
    chester va
    thanks for the tips, i tried the hairdryer for about 20sec and managed to get them off. as you said not a good spot for them i was about ready to cut the plastic underneath to get at them (very frustrating)
Similar Threads
Forum Title Date
The Ammo & Reloading Forum New Hornady Primer Feeder Friday at 10:43 AM
The Ammo & Reloading Forum New Hornady swage tool Wednesday at 2:58 PM
The Ammo & Reloading Forum Hornady Bullet Seat/Taper Crimp Die for 9mm Oct 2, 2014
The Ammo & Reloading Forum Hornady Bullet Feeder Die questions Sep 29, 2014
The Ammo & Reloading Forum Hornady Manual Sep 20, 2014

Share This Page