How much for 50 rounds

Discussion in 'The Ammo & Reloading Forum' started by Jack Ruby, Dec 8, 2009.

  1. Jack Ruby

    Jack Ruby New Member

    Joined:
    Dec 6, 2009
    Messages:
    11
    If you guys break it down how much does 50 reloaded rounds for the range cost you?
    Please say what caliber and if you cast bullets or not please.
  2. woolleyworm

    woolleyworm Active Member

    Joined:
    Feb 23, 2009
    Messages:
    4,953
    Location:
    SW Fort Worth
    .327 Fed Mag - just under $5 per 50 using Meister Hardcast 115gr LSWC and Titegroup

    .45acp - $11 per 50 using 185gr Rainier plated and Clays and 231.

    .45acp - $12 per 50 with 230gr JHP's and BlueDot

    .223 - $12 per 50 with 55gr Montana Gold and H335 or Varget.

    what calibers are you looking for in particular?

    Here's a great site that has been around for awhile and referenced by others, it's a really good cost calculator.

    http://www.handloads.com/calc/loadingCosts.asp
  3. res45

    res45 Member

    Joined:
    Sep 21, 2007
    Messages:
    185
    38 and 9mm / $5 per 50 Bullseye and HP-38 Cast and Plated bullets.

    357 Mag. / $8 per 50 IMR 4227 and 158 gr. SWC Cast bullets.

    $11 per 50 H110 and 158 gr. Jackated HP

    7.62 x 39 / $11 per 50 Reloader #7 or AA-1680 123 gr. FMJ,SP or V_MAX

    7.62 x 54r $20 per 50 Reloader #15 150 gr. BTSP

    9 x 18 Mak. / $5 per 50 W231 93 gr. Cast bullet.

    All my Cast bullets are commercial bought from a local commercial caster,powder and bullets I buy in bulk and usually on sale.
    Last edited: Dec 8, 2009
Similar Threads
Forum Title Date
The Ammo & Reloading Forum Does anyone know how much 1000 rounds of 45 acp brass weighs? Feb 13, 2009
The Ammo & Reloading Forum How much is enough.... Jan 13, 2014
The Ammo & Reloading Forum how much is enough? Jul 17, 2013
The Ammo & Reloading Forum Does It Matter Much To Reload A Shell That Still Has Black Residue In The Bottom Jun 18, 2013
The Ammo & Reloading Forum why so much difference in shell holder # between manufacturers Jun 10, 2013

Share This Page