1. Get Gear'd Up! Enter to WIN $1000 in gear!

    Please Click Here for full details and to enter. You will need to be registered and logged in to view the details and to participate.

    Thanks and good luck to everyone

Is this LE only?...

Discussion in 'Technical Questions & Information' started by Smokin Guns, Nov 15, 2003.

  1. Smokin Guns

    Smokin Guns New Member

    Joined:
    Jul 25, 2002
    Messages:
    4,462
    Location:
    "Gun Culture Members Clubhouse"...
    Ran across one of these and am curious if it's civilian legal?...Any idea...:confused:

    Attached Files:

  2. Xracer

    Xracer *TFF Admin Staff Mediator*

    Joined:
    Feb 23, 2001
    Messages:
    9,141
    Location:
    Minn-eeee-sota, ya, sure, you bet!
    Kinda hard to make out from the picture, but if that rear protrusion is a shoulder stock, or acts as a shoulder stock, I doubt if it's legal.
  3. Smokin Guns

    Smokin Guns New Member

    Joined:
    Jul 25, 2002
    Messages:
    4,462
    Location:
    "Gun Culture Members Clubhouse"...
    Thanks Xracer! It's a High Standard 12 ga, and that is a rotating shoulder stock portrusion. I'm just curious...Mossberg also made a Bullpup 12 gauge and it is civilian legal...Know of any sites where i can go and look it up for its legality?...:)
  4. gpostal

    gpostal Former Guest

    Joined:
    Feb 20, 2003
    Messages:
    4,552
    yes they are legal , i have seen several ,they go for around 650.00 here ,

    measure the barrel length ,then over all length should be 26"

    the rear stock should rotate also ,they are pretty neat ,i wish i didn't pass on the last one i saw at a pawn shop
  5. Smokin Guns

    Smokin Guns New Member

    Joined:
    Jul 25, 2002
    Messages:
    4,462
    Location:
    "Gun Culture Members Clubhouse"...
    Thanks gpostal!...:cool:

    Zigzag, I went to the site! Thanks...;)


    [​IMG]
  6. gpostal

    gpostal Former Guest

    Joined:
    Feb 20, 2003
    Messages:
    4,552
    i had one of the mossberg /maverick bull-pups ,they are much larger than the high standard , the bullpups made by just ,"maverick" are more pricy they only made them for a few years ,using mossy 500's ,then when they went out ,mossberg started making them


    here was the one i had ,never fired it

    [​IMG]
  7. CountryGunsmith

    CountryGunsmith New Member

    Joined:
    Jan 29, 2003
    Messages:
    5,115
    Location:
    Deep Piney Woods of East Texas
    Yep, the High Standard 10B, made during the early to mid-1970's. Basically a modified Supermatic.

    I have parts if/when it breaks. :D

Share This Page