IVER JOHNSON FIRING PIN NUT 32 & 38 S&W

Discussion in 'Technical Questions & Information' started by thunderace, Dec 10, 2009.

  1. thunderace

    thunderace New Member

    Joined:
    Feb 1, 2009
    Messages:
    56
    HI, can anyone tell me what thread was used on the firing pin nut or so called bushing on the 32 and 38 sw cal pistols.? Are they the same nut?I have a 32 S&W early 1900s breaktop that needs one and it looks like I may have to make it or keep looking for one.The threads where it goes are a little beat up and may have to be gone over with a tap if it is a thread that is in use today.If not ,one must be made and possibly stacked in place. thanks , Rick
  2. marcodelat

    marcodelat Member

    Joined:
    Mar 21, 2009
    Messages:
    128
    If you are talking about an IVER JOHNSON OLD MODEL SAFETY HAMMER AUTO REVOLVER

    ... you are in luck - Numrich seems to have these:

    http://www.e-gunparts.com/product.asp?chrProductSKU=524370A&CatID=3868&mySort=2

    They are out of any for:

    NEW MODEL SAFETY HAMMER AUTO REVOLVER

    http://www.e-gunparts.com/product.asp?chrProductSKU=524370B&CatID=3867&mySort=1

    SAFETY HAMMERLESS NEW MODEL

    http://www.e-gunparts.com/product.asp?chrProductSKU=524370B&CatID=3869&mySort=1

    ... and there is not even a listing for one for the Safety Hammerless Old Model

    You could try calling Jack First : http://www.jackfirstgun.com/index.php
  3. thunderace

    thunderace New Member

    Joined:
    Feb 1, 2009
    Messages:
    56
    no they dont have any at this time , thanks rick
  4. jondar

    jondar New Member

    Joined:
    Mar 2, 2009
    Messages:
    464
    Rick, is your IJ a second or third model. Early 1900's could be either. Not sure if the 2nd and 3rd models took the same bushing. Maybe Bill Goforth could answer.
  5. b.goforth

    b.goforth New Member

    Joined:
    Dec 30, 2003
    Messages:
    3,174
    Location:
    houston, tx
    i believe the firing pin bushing is the same for both models. send me an e-mail at goforth2@peoplepc.com and i will let you know if i have one. i do not have any information on the threads other than they are very fine.
    bill
Similar Threads
Forum Title Date
Technical Questions & Information Iver Johnson questions Oct 13, 2014
Technical Questions & Information Identify Iver Johnson .32 Top Break Oct 13, 2014
Technical Questions & Information Date a 38 Iver Johnson TB hammerless? Oct 8, 2014
Technical Questions & Information firing pin for a 16 gauge single barrel Iver Johnson firearms & cycleworks shotgun Sep 27, 2014
Technical Questions & Information Iver Johnson Target Sealed 8? Sep 25, 2014

Share This Page