Lee press/RCBS dies are they compatabe

Discussion in 'The Ammo & Reloading Forum' started by Guest, Feb 24, 2003.

  1. Guest

    Guest Guest

    tccox
    Member
    Posts: 6
    (6/14/01 2:11:51 pm)
    Reply | Edit | Del All Lee press/RCBS dies are they compatabe
    --------------------------------------------------------------------------------
    Will RCBS dies work on the Lee single action press? I don't have access to any RCBS dies but there is a set on an auction that I am interested in. Thanks, Tom

    Bompa
    Member
    Posts: 21
    (6/14/01 5:57:16 pm)
    Reply | Edit | Del Re: Lee press/RCBS dies are they compatabe
    --------------------------------------------------------------------------------
    As long as they are 7/8-14 thread they will work together..
    Most all single stage and turret presses are bored for the
    same size thread,it is an industry standard..
    When you think about it, it is almost amazing.. Generally part
    interchangeability between manufactures is not the case.
    All to the reloaders benefit..
    Hope this helps..

    Brass Rat
    Member
    Posts: 1
    (8/1/01 10:00:09 pm)
    Reply | Edit | Del Re: Lee press/RCBS dies are they compatabe
    --------------------------------------------------------------------------------
    Will work with no problem. Don't forget to get the appropriate Lee shellholder though.
    Guns cause crime like flies cause garbage. MOLON LABE

    Tac401
    Administrator
    Posts: 1806
    (8/1/01 10:15:09 pm)
    Reply | Edit | Del
    ezSupporter
    Re: Lee press/RCBS dies are they compatabe
    --------------------------------------------------------------------------------
    Welcome Aboard Brass Rat!
    The Firearms Forum Vietnam Memories Bulletin Board Contact Administrator

    kdubaz
    Moderator
    Posts: 434
    (8/1/01 10:37:16 pm)
    Reply | Edit | Del Re: Lee press/RCBS dies are they compatabe
    --------------------------------------------------------------------------------
    Howdy, Brass Rat -

    Welcome to the board. Pull up a stool to the reloading bench and make yourself comfortable. Don't be shy about jumping in on any topic - we need all the help we can get!
    Keep below the ridgeline!
Similar Threads
Forum Title Date
The Ammo & Reloading Forum Inline Fabrication goodies Mar 22, 2014
The Ammo & Reloading Forum Anyone load 327 Fed Mag using 32 H&R Mag dies Mar 13, 2014
The Ammo & Reloading Forum 9mm dies for 380? Mar 7, 2014
The Ammo & Reloading Forum .318 ( 8x57jr ) reload dies and brass question Feb 23, 2014
The Ammo & Reloading Forum storage of dies with lnl bushings Feb 14, 2014