Length of Pull AR-15

Discussion in 'The Pre-Ban Forum' started by eklutna, Oct 21, 2007.

  1. eklutna

    eklutna New Member

    Oct 21, 2007
    Florida Pan Handle
    I am currently building a AR-15. I have a DPMS lower with RRA kit. The upper is a RRA 20” chrome lined A3 with gas block with weaver mount. I got two folding sites, bipod and plan to mount leatherwood m-600. I currently have an A2 butt stock. But this is where I will have problems. I am 6’5” tall and my length of pull is about 1 inch longer than most people. I bought an extended butt cap from RRA but the alignment with the stock is not good. It looks like a patch job at best. I thought of getting a Magpull stock but they are very expensive at 235.00 and I am not sure that the length of pull will adjust to where it would be needed. Any suggestion would be great.

  2. sigguy

    sigguy New Member

    Nov 2, 2007
    I am 6'7" and had the same problem so I made my own, I had not really thought about making any to sell but if your interested let me know at jcjones@ai5.net
Similar Threads
Forum Title Date
The Pre-Ban Forum Minimum bbl length for .233 Feb 27, 2003