loads for 308 and 243

Discussion in 'The Ammo & Reloading Forum' started by rouser_00, May 4, 2008.

  1. rouser_00

    rouser_00 New Member

    Joined:
    May 2, 2008
    Messages:
    25
    hi guys
    just wondering if any of you out there had any nice accurate loads for either the 243 or 308.
    the problem is im in ireland and im kinda limited to what materials i use,so im stuck with either vit n140,vit n160 or varget
    thanks guys
  2. Popgunner

    Popgunner New Member

    Joined:
    Dec 3, 2005
    Messages:
    1,764
    Accurate is relative gun to gun. You just have to use a manual & work from starting load up to where you get good accuracy & the load works well. Do you have a manual?
  3. JohnK3

    JohnK3 New Member

    Joined:
    May 5, 2003
    Messages:
    1,636
    I've found that the Sierra loading manual is a great place to start working up an accurate load using their components. They usually mention an "accuracy" load and a "hunting" load for each caliber/bullet weight combo. You can start with that load to work towards the best load for your particular gun.
  4. rouser_00

    rouser_00 New Member

    Joined:
    May 2, 2008
    Messages:
    25
    hi guys
    yeh ive the manual
    jesus not just one quite a few
    last night at the range i had 8 rounds in a quarter inch group at 124 yards with my .243
    now that ive gotten a nice load for that ill try my .308
  5. Terry_P

    Terry_P New Member

    Joined:
    Mar 23, 2008
    Messages:
    2,513
    Location:
    NH
    I don't load those calibers so can't help much but it sounds like you're doing pretty well by yourself.
Similar Threads
Forum Title Date
The Ammo & Reloading Forum Figuring powder loads......makes me want to pull my hair out! Today at 5:56 PM
The Ammo & Reloading Forum 44 mag pet loads Jun 14, 2014
The Ammo & Reloading Forum Malfunctions, first batch of reloads Jun 1, 2014
The Ammo & Reloading Forum Got a chance to shoot more .380 reloads - one FTF May 21, 2014
The Ammo & Reloading Forum Pull bullets and dump factory loads for good brass? May 20, 2014

Share This Page