Milled AK receiver

Discussion in 'Technical Questions & Information' started by TheRooster, Sep 6, 2011.

  1. TheRooster

    TheRooster New Member

    Joined:
    Feb 6, 2011
    Messages:
    55
    Location:
    Idaho
    I was just wondering if anyone has machinist prints for an AK47 or AK74 receiver or even KNOWS someone who might have some. I want to mill my own and need prints with good, specific dimensions and details. Thanks to anyone who replies in any way.
  2. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,600
    Location:
    Australia
    what version ? got em all

    but its a folded beats so try this one , we had decent results with the builders milling it from billet

    and heres the CAD ( dxf ) files if your going that way will post the variations next

    Attached Files:

  3. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,600
    Location:
    Australia
    AK and variants

    Attached Files:

  4. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,600
    Location:
    Australia
    just zupped them all into one file , ( been a while since i was allowed to play with AK's so forgot how many there where )

    Attached Files:

  5. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,600
    Location:
    Australia
    and this is the Tula factory master manual with all spec's ( in Russian sorry )

    but the measurements you can read ok ( metric)

    http://min.us/mbb1HQcHCX
    Last edited: Sep 6, 2011
  6. Jim Hauff

    Jim Hauff New Member

    Joined:
    Apr 20, 2008
    Messages:
    2,976
    Location:
    Lehigh Valley, PA
    Jack,
    How did you come by the Russian prints? There's gotta be an interesting story involved? Clandestine intrusion? Mission impossible stuff?
  7. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,600
    Location:
    Australia
    Narr, sorry to disappoint eh .. went to russia and the tula factory and other places , got drunk with some factory bosses and came back with a pile of stuff .. booze opens a lot of doors in russia ..
  8. TheRooster

    TheRooster New Member

    Joined:
    Feb 6, 2011
    Messages:
    55
    Location:
    Idaho
    I cant open the russian tula book.
  9. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,600
    Location:
    Australia
    its a download only because of size Rooster

    you should see a yellowish /orange download button

    hit that and save as you would any document
  10. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,600
    Location:
    Australia
    i've removed all the restrictions from all the files there so that may help ( some firewalls block downloads if i have some restrictions )

    http://minus.com/jack404 will give you a list of all files i have up

    and this is for the rails http://minus.com/mvjltWM
    Last edited: Sep 7, 2011
  11. TheRooster

    TheRooster New Member

    Joined:
    Feb 6, 2011
    Messages:
    55
    Location:
    Idaho
    Just had to turn off the firewalls. Awesome and now to download!!!
  12. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,600
    Location:
    Australia
    no worries , i block the info from islamic nations but some IP's for those places get mixed up with other places and its a hassle to sort a billion individual address's , the worse was AOL bought half the allocated IP's for pakistan and that screwed up lots of folks but as you can see 178,000+ downloads , its popular
  13. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,600
    Location:
    Australia
    PM me your address and i'll send you a dvd set , 40,000 odd documents and blueprints

    i'll ask you make a donation to Salvation army , or Soldiers angels there

    i'm a tither and using the old Christian financing system of old , you make $5 donation , i take that off my tithe and everything is covered here

    who need s paypal when you have God?
  14. spoons21369

    spoons21369 New Member

    Joined:
    Feb 6, 2014
    Messages:
    2
    hey jack404 are those tula prints still up?ive tried finding them and cant seem to get my hands on them.
  15. raven818

    raven818 Well-Known Member Supporting Member

    Joined:
    Oct 3, 2011
    Messages:
    7,176
    Location:
    Jax, Fl.
    Jack, under his name, is a Former Guest.
  16. spoons21369

    spoons21369 New Member

    Joined:
    Feb 6, 2014
    Messages:
    2
    i didnt even notice.does anyone else on the board have the manual for download?
  17. WHSmithIV

    WHSmithIV Well-Known Member

    Joined:
    May 3, 2012
    Messages:
    5,462
    Location:
    Moore, Idaho
    You can also buy Polish blanks. There are two versions. Flat with all the holes drilled that you need to put the bends in or prebent with the trigger and magwell cutouts All you have to do is drill the holes. Additionally, they will need to be heat treated afterwards and finished since they are 'in the white'. They also come with the rails and cross pins. Price on them is less than $40
Similar Threads
Forum Title Date
Technical Questions & Information Norinco MAK 90 milled or not ? May 28, 2008
Technical Questions & Information Stevens Favorite 17 Receiver Question Jun 26, 2014
Technical Questions & Information question on turk receiver markings May 24, 2014
Technical Questions & Information Winchester/Rossi receiver question Dec 20, 2013
Technical Questions & Information purpose of small clip on bottom of receiver of Anschutz model 1411 receiver Oct 20, 2013

Share This Page